Advertisement
Quick Links
Operator's Manual
3
/
Ton Speedy Lift
1
2
Garage Jack
Model 50357
CUSTOMER HELP LINE
Parts and Questions
1-888-332-6419
8:00 AM - 4:45 PM Central Time
WARNING: Before using this product,
read this Operator's Manual and follow
all its Safety Rules and Operating
Instructions.
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
www.craftsman.com
Monday- Friday
• Safety
• Operation
• Assembly
• Maintenance
• Parts
Printed in China
Advertisement
Related Manuals for Craftsman 50357
Summary of Contents for Craftsman 50357
- Page 1 Operator’s Manual Ton Speedy Lift Garage Jack Model 50357 CUSTOMER HELP LINE Parts and Questions 1-888-332-6419 8:00 AM - 4:45 PM Central Time Monday- Friday • Safety • Operation • Assembly • Maintenance WARNING: Before using this product, • Parts read this Operator’s Manual and follow...
- Page 2 AIR PURGE PROCEDURE IMPORTANT: BEFORE FIRST USE, perform the following Air Purge Procedure to remove any air that may have been introduced into the hydraulic system as a result of product shipment and handling. PURGE AIR REMOVE TOOL TRAY With a flat blade screwdriver, push the oil fill Loosen and remove the two screws plug slightly to the side to purge trapped air securing magnetic tool tray to jack frame.
- Page 3 DESCRIPTION Do Not Overload Jack Do not overload this jack beyond its rated Craftsman model 50357 features a 7,000 lbs. capacity. Overloading this jack beyond its maximum capacity. Lifting range for this jack is rated capacity can cause damage to or failure 5-1/2 inches to 22 inches.
-
Page 4: Features And Operation
PICTURE 1 Handle Assembly • Insert the assembled handle into the handle Upper socket, until it is firmly seated. Handle • Tighten the bolt on handle socket to prevent accidental removal of handle while inuse. Spring Pin Spring Pin FEATURES & OPERATION Receiver Operation Raising the Jack... -
Page 5: Maintenance
• When the ram reaches maximum extension, • When storing the jack, always have the oil bypasses the lift cylinder through an saddle and pump plunger in the down overload valve back into the oil reservoir, postion. protecting the jack from damage. This ALWAYS USE A GOOD GRADE bypass system also goes into effect when the jack is overloaded (load exceeds 4,000... -
Page 6: Exploded View And Parts List
EXPLODED VIEW AND PARTS LIST Description Qty. Saddle Power Unit Assembly Handle Assembly Front Wheel Handle Socket Assembly Rear Caster Assembly Magnetic Tool Tray Oil Fill Plug Operators Manual Warning Label TROUBLESHOOTING Symptom Poor jack Handle Jack will Jack will Jack will Jack will lifting,... - Page 7 NOTE...
- Page 8 For Help Line, Parts and Service: Call 8:00 am - 4:45 pm, CT, Monday - Friday 1-888-332-6419 Para la linea de ayuda, partes y servicio: Llame de 8:00 am - 4:45 pm, CT, Lunes-Viernes 1-888-332-6419...