Table of Contents
Advertisement
Additional Functions
3. DATE TYPE SELECT
4. AUTO SLEEP TIME
5. AUTO CLEAR TIME
6. DAYLIGHT SV. TIME
*: indicates factory settings.
1.2.3.7 ADJUST./CLEANING
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Additional Functions
1. TRANS. ROLR CLEAN
2. FIX. UNIT CLEANING
3. FEEDER CLEANING
4. SPECIAL MODE M
5. SPECIAL MODE N
6. SPECIAL MODE P
7. SPECIAL MODE Q
8. SPECIAL MODE R
9.SPECIAL MODE S
10. CONT PRINT MODE
11. BACK EDGE MODE
12.LARGE PAPER MODE
13. AUTO ADF DRTY ADJ
14. MAINTENANCE CODE
*: indicates factory settings.
1.2.3.8 REPORT SETTINGS
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Additional Functions
1. SETTINGS
2. LIST PRINT
*: indicates factory settings.
1.2.3.9 SYSTEM SETTINGS
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Additional Functions
1. DEVICE INFO
2. NETWORK SETTINGS
3. COMMUNICATIONS
4. REMOTE UI
5. ACCESS TO DEST.
Available Settings
DD/MM YYYY, YYYY MM/DD, MM/DD/ YYYY(*)
ON (3 - 30 (3(*)) MIN. in one-minute increments), OFF
ON (1 - 9 (2(*)) MIN. in one-minute increments), OFF
ON: START DATE/TIME (MONTH, WEEK, DAY), END DATE/TIME
(MONTH, WEEK, DAY), OFF(*)
Available Settings
Press [OK] to start cleaning.
START CLEANING, CLEAN PAPER PRT
Set 5 sheets in the optional feeder and press [OK].
MID(*), LOW, HIGH
Not functional in this model
OFF(*), ON
OFF(*), ON
OFF(*), ON
OFF(*), SPEED PRIORITY
OFF(*), ON
OFF(*), ON
OFF(*), ON
OFF, ON(*)
Not functional in this model
Available Settings
TX REPORT: PRINT ERROR ONLY(*), OUTPUT YES, OUTPUT NO
RX REPORT: OUTPUT NO(*), PRINT ERROR ONLY, OUTPUT YES
ACTIVITY REPORT: AUTO PRINT, OFF(ON(*)), TX/RX SEPARATE
(OFF(*), ON)
ACTIVITY REPORT
SPEED DIAL LIST: 1-TOUCH LIST, CODED DIAL LIST, GROUP DIAL LIST
ADD BOOK DETAILS: 1-TOUCH LIST, CODED DIAL LIST
USER DATA LIST
Available Settings
DEVICE NAME, LOCATION
TCP/IP SETTINGS: IP ADDRESS AUTO. (OFF(*), ON(*); DHCP, BOOTP,
RARP), IP ADDRESS, SUBNET MASK, GATEWAY ADDRESS, USE LPD
(ON(*); PORT NO., OFF), RAW SETTINGS (ON(*); PORT NO., USE
BIDIRECTIONAL, OFF), USE HTTP (ON(*); PORT NO., OFF), SET IP ADD
RANGE (OFF(*), ON), RX MAC ADD SET. (OFF(*), ON)
SNMP SETTINGS: USE SNMP (ON(*): PORT NO., OFF), COMMUNITY
NAME 1, COMMUNITY NAME 2, SNMP WRITABLE 1 (ON(*), OFF), SNMP
WRITABLE 2 (ON, OFF(*))
DEDICATED PORT: ON(*), OFF
ETHERNET DRIVER: AUTO DETECT (AUTO(*), MANUAL), DUPLEX
(HALF DUPLEX(*), FULL DUPLEX), ETHERNET TYPE (10 BASE-T(*), 100
BASE-TX)
VIEW IP ADDRESS: IP ADDRESS, SUBNET MASK, GATEWAY ADDRESS
STARTUP TIME SET.: 0(*) to 300 SEC.
TX START SPEED: 2400 to 33600(*) bps
RX START SPEED: 2400 to 33600(*) bps
MEMORY LOCK SETTI: OFF(*), ON (PASSWORD, REPORT PRINT,
MEMORY RX TIME)
ON(*), OFF
RESTRICT NEW ADD. : OFF(*), ON
FAX DRIVER TX: OFF, ON(*)
Chapter 1
0013-7743
0013-7744
0013-7745
1-15
Advertisement
Table of Contents
