Related Manuals for Philips VIDEOPAC
Summary of Contents for Philips VIDEOPAC
- Page 2 Newscaster This Videopac can be used to di s play several messages on your TV set. Carry out the following instructions to store a message. Press RESET A question mark is shown at the bottom left of the screen. This asks what you want...
- Page 3 A square i s shown on the screen. Use the keyboard to enter the basi c message to be displayed (max. 73 characters). If your message i s shorter than this, end w i t h ENTER. An example: VIDEOPAC COMPUTER - FUN EXCITEMENT AND EDUCATION FOR THE WHOLE FAMILY. This is the message that will eventually...
- Page 4 When you have entered the time, a square appears on the screen. Now enter the interrupt message (max. 25 characters). If message is shorter than this, end with ENTER. An example: TRY THE NEW VIDEOPAC NOW. This w ill be displayed for approximately 30 seconds each time.
- Page 5 Press key 3 Type in the actual time (HH MM SS). The 24-hour clock starts running when the last figure i s entered. Press key 4...
- Page 6 When you press this key, the basic message will be displayed, replaced (at the speci f ied times) by the interrupt message. If you w i s h to stop the di s play press any key except RESET. The question mark w ill be displayed, and you can then press key 5.
- Page 7 Key 6 Press one of the following keys to change the background colour on the TV set. green blue yellow /red turquoise purple...
- Page 8 Key 7 The key can be used to correct mistakes in a message. A square i s shown on the screen, in which the message letters w ill be shown. Press the ENTER key repeatedly until you reach the part to be changed, then enter the first new character. Press ENTER and enter the next character, and so on.
- Page 9 When RESET is pressed, all information entered w ill be erased. Special characters for languages The + - × ÷ = and CLEAR keys are reserved for special characters. (not used with key 5). ÷ " ° × CLEAR A ÷ gives Ä, O × gives Ø, etc. For reference Key 1 Enter basic message.
- Page 10 Select another game. Select another Videopac. Remove existing Videopac by placing one hand next to it, and pulling handle upw ards. Replace Videopac in its box. Refer now to intructions for use of the next Videopac. Plug aerial back into TV, and unplug the Videopac Computer from the mains.