1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Storage
  5. 7D2C
  6. User manual

Lenovo 7D2C User Manual

800mm deep rack cabinet
Hide thumbs Also See for 7D2C:
Table of Contents

Advertisement

Quick Links

Download this manual
ThinkSystem Micro DataCenter 6U 800mm
Deep Rack Cabinet
User Guide
Machine Type: 7D2C and 7D2P

Advertisement

Table of Contents
loading

Related Manuals for Lenovo 7D2C

Summary of Contents for Lenovo 7D2C

  • Page 1 ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide Machine Type: 7D2C and 7D2P...
  • Page 2 First Edition (June 2020) © Copyright Lenovo 2020. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No.

  • Page 3: Table Of Contents

    Index ....59 Install the DPI universal rack power distribution unit....© Copyright Lenovo 2020...
  • Page 4 ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide...

  • Page 5: Safety

    Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza. Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet. Antes de instalar este produto, leia as Informações sobre Segurança. © Copyright Lenovo 2020...

  • Page 6: Safety Statement

    Antes de instalar este producto, lea la información de seguridad. Läs säkerhetsinformationen innan du installerar den här produkten. Safety statement Read this section carefully before operating any task on the cabinet. R001 CAUTION: To ensure safety, all configurations of the rack cabinet must be certified by a nationally recognized testing laboratory to verify compliance with country-specific safety regulations.
  • Page 7 2. Remove the signal cables from the connectors. 4. Attach signal cables to other devices. 3. Remove all cables from the devices. 5. Connect power cords to their sources. 6. Turn ON all the power sources. © Copyright Lenovo 2020...
  • Page 8 S036 18 - 32 kg (39 - 70 lb) 32 - 55 kg (70 - 121 lb) > 55 kg (121 lb) CAUTION: Use safe practices when lifting. R006 CAUTION: Do not place any object on top of a rack-mounted device unless that rack-mounted device is intended for use as a shelf.
  • Page 9 Pack the rack cabinet in the original packaging material, or equivalent. Also, lower the leveling pads to raise the casters off the pallet and bolt the rack cabinet to the pallet. © Copyright Lenovo 2020...
  • Page 10 viii ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide...

  • Page 11: Chapter 1. Introduction

    ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet is a 6U cabinet designed for Micro DataCenter servers. Figure 1. ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet The cabinet comes with a limited warranty. For details about the warranty, see: https://support.lenovo.com/us/en/solutions/ht503310 For details about your specific warranty, see: http://datacentersupport.lenovo.com/warrantylookup © Copyright Lenovo 2020...
  • Page 12 ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide...

  • Page 13: Chapter 2. Specifications

    • SE350 E2 Enclosure (2U 2-node): up to three units of enclosures with E2 Enclosure Short Rail Kit for more information. https://thinksystem.lenovofiles.com/help/topic/SE350/pdf_files.html Note: This rack cabinet does not support SE350 E1 Enclosure (1U 2-node). See https:// for details about SE350 thinksystem.lenovofiles.com/help/topic/SE350/server_specifications.html configurations. © Copyright Lenovo 2020...
  • Page 14 ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide...

  • Page 15: Chapter 3. Parts Listing

    Chapter 3. Parts Listing Figure 2. Rack cabinet components Table 1. Rack cabinet components Rack cabinet frame Shipping bracket Wheeled trays Removable and reversible door Removable side panel Hardware box (see “Hardware box” on page Removable side panel © Copyright Lenovo 2020...
  • Page 16 Hardware box Figure 3. Components in the hardware box Table 2. Components in the hardware box 20 M6 screws One socket wrench 16 flange nuts One spud socket wrench 20 G-type cage nuts 15 cable ties One combination wrench Two bolt-down brackets ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide...

  • Page 17: Chapter 4. Moving The Rack Cabinet

    WARNING: Failure to follow these instructions could result in equipment damage, severe injuries, or death. Before moving the rack cabinet, complete the following steps: 1. Unlock and open both doors by pulling up the handle and turning it clockwise. © Copyright Lenovo 2020...
  • Page 18 Figure 4. Opening the door 2. Remove the four shipping brackets that secure the cabinet to the pallet. Figure 5. Removing shipping brackets Two options are available when moving the cabinet: ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide...

  • Page 19: Casters

    Casters S037 CAUTION: The weight of this part or unit is more than 55 kg (121.2 lb). It takes specially trained persons, a lifting device, or both to safely lift this part or unit. Complete the following steps to move the cabinet to the designated site: Step 1.

  • Page 20: Crane Lifter

    Figure 7. Adjusting the rack cabinet feet Step 2. Make sure the ramp board is lowered and balanced, and then push the cabinet from the rear until it reaches the designated site. Figure 8. Sliding the cabinet down from the pallet Notes: •...
  • Page 21 Attention - Drop hazard. Complete the following steps to lift and move the cabinet to the designated site: Step 1. Remove the four plugs from the four corners on the top of the cabinet frame. Figure 9. Lifting the rack cabinet Step 2.
  • Page 22 b. Insert the open end of the combination wrench in the hardware box (see “Hardware box” on page 6) into the hexagonal head of the foot, and turn it clockwise until the foot makes firm contact with the floor. Figure 11. Adjusting the rack cabinet foot c.
  • Page 23 Figure 13. Installing the bolt-down brackets Chapter 4 Moving the rack cabinet...
  • Page 24 ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide...

  • Page 25: Chapter 5. Managing Cables

    See this section to learn how to connect ground cable in the rack cabinet. The following grounding pins close to door frame bottom are available for grounding cable connection. Grounding cable from the cabinet frame This cable is required for grounding. © Copyright Lenovo 2020...
  • Page 26 Figure 15. Grounding cable from the cabinet frame Grounding cable from the cabinet door This is an optional grounding cable. ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide...
  • Page 27 Figure 16. Grounding cable from the cabinet door Grounding cable from the side panel This is an optional grounding cable. Chapter 5 Managing cables...
  • Page 28 Figure 17. Grounding cable from the side panel ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide...

  • Page 29: Chapter 6. Installing Optional Kits

    Note: When installed vertically into this cabinet, the server can be installed with server top facing either right or left. In this section, however, it is illustrated with the top of server facing right as an example. © Copyright Lenovo 2020...
  • Page 30 P P r r o o c c e e d d u u r r e e Step 1. Remove the inner rails. Figure 18. Removing the inner rails ① Pull the inner rail outward until the release latch becomes visible. ②...
  • Page 31 Figure 19. Installing the inner rails to the enclosure ① Align the mounting holes in the inner rail with the corresponding rail mounting pins on the side of the enclosure. ② Push the inner rail as shown until the mounting pins on the enclosure lock into place with the inner rail.
  • Page 32 Figure 21. Removing compute nodes ① Press on the release button. ② Slide the node out from the enclosure. Step 6. Install the rear mounting bracket of the right outer rail to the lower EIA flange. Figure 22. Installing the rear mounting bracket to the EIA flange ①...
  • Page 33 Figure 23. Installing the front mounting bracket to the EIA flange Note: Make sure the rail stays horizontal. ① Open the front bracket and align the front end of the outer rail to the EIA flange. ② Pull the outer rail into the EIA flange until the pins are inserted into the corresponding holes. ③...
  • Page 34 Figure 25. Rotating SE350 E2 Enclosure Step 11. Install the E2 Enclosure into the rack. Figure 26. Installing SE350 E2 Enclosure Note: Make sure the top of the enclosure is facing right. ① Lift and align the enclosure to the slide rails. Position the enclosure as shown, and slide it into the rack.
  • Page 35 ③ Push the enclosure all the way into the rack until it clicks into locked position. Step 12. (Optional) Open the rack release latches and tighten the screws to firmly secure the rail before moving or placing the rack cabinet in a vibration-prone area. Figure 27.

  • Page 36: Install The Rail Kit And Sr250

    ① (Optional) To reduce the weight of the enclosure, disconnect the power adapter cables from the nodes and remove the nodes. ② Disconnect all the cables that are connected to the enclosure, and slide the enclosure out until it stops. ③...
  • Page 37 Figure 29. Removing the inner rails ① Pull the inner rail outward until the release latch becomes visible. ② Press on the release latch. ③ Remove the inner rail from the outer rail. Step 2. Install the inner rails to the server. Chapter 6 Installing optional kits...
  • Page 38 Figure 30. Installing the inner rails to the enclosure ① Align the mounting holes in the inner rail with the corresponding rail mounting pins on the side of the server. ② Push the inner rail as shown until the mounting pins on the server lock into place with the inner rail.
  • Page 39 Step 4. Install the rear mounting bracket of the right outer rail to the lower EIA flange. Figure 32. Installing the rear mounting bracket to the EIA flange ① Align the rear pins on the outer rails to the EIA flange. ②...
  • Page 40 Step 6. Repeat the previous two steps to install the left outer rail to the upper EIA flange. Step 7. (Optional) If you need to ship the rack cabinet with servers installed or place the rack cabinet in a vibration-prone area, install two M6 screws into the mounting flanges between the two rear pins on both sides.

  • Page 41: (Trained Technicians Only) Install The Wall Mounting Kit

    Figure 36. Securing the server Rack release latches Front screw Remove the server from the rack Figure 37. Removing SR250 ① Disconnect all the cables that are connected to the server, and slide the server out until it stops. ② Press the release latches to disengage the inner rails. ③...
  • Page 42 • When moving or replacing the cabinet after installation, contact a qualified installer specified by Lenovo service. Installation or movement of the product must be carried out by a skilled professional. If an unqualified person moves and installs the product, it may cause safety risks.
  • Page 43 Figure 38. Mounting bolt location on the wall Step 2. Remove the six screws that secure the two wheeled trays. Chapter 6 Installing optional kits...
  • Page 44 Figure 39. Removing the wheeled trays Step 3. Loosen the two M12 nuts on the feet on one long side of the cabinet. Figure 40. Loosening the nuts Step 4. Slide the lower wall mounting bracket in, and tighten the nuts to secure the brackets. Step 5.
  • Page 45 Figure 41. Securing the lower bracket Step 8. Connect the two eyebolts and two keyholes in the upper wall mounting bracket to the hook of a crane lifter, and make sure the cord length allows an angle more than 75˚. Step 9.
  • Page 46 Figure 42. Installing wall mount nails Step 12. Repeat the previous step on the other three spots on the wall. Step 13. Lift the cabinet with two people, and align the key-shaped holes on the upper bracket to the two top nails;...

  • Page 47: Install The Dpi Universal Rack Power Distribution Unit

    Figure 43. Installing the cabinet to the wall Install the DPI universal rack power distribution unit Follow the instructions in this section to install the DPI universal rack power distribution unit. A A b b o o u u t t t t h h i i s s t t a a s s k k See the following table to identify the components that come with the rail kit.
  • Page 48 One small mounting plate One cable management bracket One horizontal mounting plate One power distribution unit One 1U blank filler panel P P r r o o c c e e d d u u r r e e Step 1. Secure the power distribution unit to one side of the horizontal mounting plate with two screws.

  • Page 49: Installing Switches

    Installing switches See this section to learn how to install switches into ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet. This rack cabinet supports the following switches. See the corresponding links for installation instructions. • https://systemx.lenovofiles.com/help/topic/com.lenovo.thinksystem.ne0152t.doc/ts_ne0152t.html • https://systemx.lenovofiles.com/help/topic/com.lenovo.thinksystem.ne1032t.doc/ts_ne1032t.html • https://systemx.lenovofiles.com/help/topic/com.lenovo.thinksystem.ne2572.doc/ts_ne2572.html •...

  • Page 50: Installing Uninterruptible Power Systems (Ups)

    Note: Before installing NE1032T and NE1072T RackSwitch with corresponding rail-kit into the rack cabinet, tilt them slightly so that they can slide through the cabinet frame. Figure 46. Tilting the switch to fit in the cabinet Installing uninterruptible power systems (UPS) See this section to learn how to install uninterruptible power systems (UPS).

  • Page 51: Chapter 7. Hardware Removal, Installation And Conversion

    Pivot the top of the panel away from the cabinet frame to remove it. Install the side panels Complete the following steps to install the side panels. P P r r o o c c e e d d u u r r e e © Copyright Lenovo 2020...

  • Page 52: Removing, Installing And Reversing The Doors

    Step 1. Align the bottom of the panel to the slot on the bottom of the cabinet frame, and pivot the top of the panel towards the cabinet frame. Figure 48. Installing the side panel Step 2. Insert the key and turn it clockwise to secure the panel to the cabinet frame. Removing, installing and reversing the doors Follow the instructions in this section to remove, install, and reverse the doors.
  • Page 53 Figure 49. Opening the door P P r r o o c c e e d d u u r r e e Step 1. Pull up and hold both of the hinge shafts to disengage the door from the cabinet frame; then, remove the door.

  • Page 54: Install The Door

    Figure 50. Removing the door Install the door A A b b o o u u t t t t h h i i s s t t a a s s k k Note: For safety, this task must be done by two people. P P r r o o c c e e d d u u r r e e Step 1.

  • Page 55: Reverse The Door

    A A f f t t e e r r t t h h i i s s t t a a s s k k i i s s c c o o m m p p l l e e t t e e d d 1.
  • Page 56 Figure 53. Opening the door P P r r o o c c e e d d u u r r e e Step 1. Pull up and hold both of the hinge shafts to disengage the door from the cabinet frame; then, remove the door.
  • Page 57 Figure 54. Removing the door Step 2. Remove the screws that secure the hinges to the cabinet frame. Step 3. Rotate both hinges 180 degree, switch the top and bottom hinges; then, install them to the opposite side of the frame. Figure 55.
  • Page 58 Step 4. If the cabinet comes with door position monitor devices, complete the following steps to remove and reinstall the devices. Remove the two screws that secure the door position monitor device to the cabinet frame. Figure 56. Removing the door position monitor device Install the device to the equivalent location on the opposite side on the cabinet frame.
  • Page 59 Figure 58. Removing and installing the door position monitor device Step 5. Remove the screws that secure the handle to the door; then, rotate the door 180 degree while keeping the handle in the original orientation, and secure the handle to the door with screws. Figure 59.
  • Page 60 Step 6. Align the door to the frame hinges, and push the shafts in to secure the door to the frame. Figure 60. Installing the door A A f f t t e e r r t t h h i i s s t t a a s s k k i i s s c c o o m m p p l l e e t t e e d d 1.

  • Page 61: Door Position Monitor Device Replacement

    See this section for replacement of the door position monitor device. Note: This component is a Third Party Option parts. Not with standing anything to the contrary, third party options are excluded from Lenovo Statement of Limited Warranty. See https://support.lenovo.com/us/en/ for details.

  • Page 62: Remove The Door Position Monitor Device

    Remove the door position monitor device Follow the instructions in this section to remove the door position monitor device. A A b b o o u u t t t t h h i i s s t t a a s s k k 1.

  • Page 63: Install The Door Position Monitor Device

    Figure 64. Removing door position monitor device Install the door position monitor device P P r r o o c c e e d d u u r r e e Step 1. Secure the device to the cabinet frame with two screws. Figure 65.
  • Page 64 Figure 66. Closing the cabinet door 2. If necessary, insert the key and turn it counterclockwise to lock the door. ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide...

  • Page 65: Appendix A. Getting Help And Technical Assistance

    Appendix A. Getting help and technical assistance If you need help, service, or technical assistance or just want more information about Lenovo products, you will find a wide variety of sources available from Lenovo to assist you. On the World Wide Web, up-to-date information about Lenovo systems, optional devices, services, and support are available at: http://datacentersupport.lenovo.com...

  • Page 66: Contacting Support

    Gathering information needed to call Support If you believe that you require warranty service for your Lenovo product, the service technicians will be able to assist you more efficiently if you prepare before you call. You can also see http:// for more information about your product warranty.

  • Page 67: Appendix B. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.

  • Page 68: Trademarks

    Trademarks Lenovo, the Lenovo logo, Micro DataCenter, ThinkSystem, Flex System, System x, NeXtScale System, and X Architecture are trademarks of Lenovo in the United States, other countries, or both. Intel and Intel Xeon are trademarks of Intel Corporation in the United States, other countries, or both.

  • Page 69: Index

    ThinkSystem Micro DataCenter iv, 1 ThinkSystem Micro DataCenter 6U 800 mm Deep Rack Cabinet 3, 5, 7, 19, 31, 37, 39–41, 45, 52–53 managing cables trademarks Micro DataCenter moving wall mount kit notices © Copyright Lenovo 2020...
  • Page 70 ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide...
  • Page 72 Part Number: SP47A59024 Printed in China (1P) P/N: SP47A59024 *1PSP47A59024*...

This manual is also suitable for:

Thinksystem micro datacenter 6u7d2p

Table of Contents