Table of Contents
Advertisement
6 Remove the drive belt and place it in the belt holder.
WARNING! Observe caution to avoid
!
trapping your hand.
7 Loosen on the cutting height stay and place in the holder.
8 Grip the front edge of the unit and pull forwards until it
stops.
9 Lift the unit until it stops and a clicking sound is heard.
The unit locks automatically in the vertical position.
Maintenance
Restoring from service position
1 Grip the front edge of the unit and loosen the lock, fold
down and slide in the unit.
2 Replace the cutting height stay and the belt. Tension the
belt with the belt adjuster.
3 Fit the front cover.
Checking the blades
To achieve the best mowing results it is important that the
blades are undamaged and well-sharpened.
Check that the blades' attachment screws are tight.
CAUTION! One or more unbalanced blades , caused by
damage or poor balancing after sharpening, can cause
vibrations in the machine.
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting obstacles
that result in a breakdown.
Replacing the blades
•
Put the unit in the service position, see Service position for
the cutting unit.
•
Lock the blade with a wooden block. Loosen the blade bolt
and remove the blade bolt, the washers and the blade.
– 25
English
Advertisement
Table of Contents
