Sound Effects - Panasonic SC-PM702 Operating Instructions Manual

Sound effects

1
Press [SOUND] repeatedly to select the effect.
2
Press [R, T] to select the setting and then press [OK].
MY SOUND "SOUND 1", "SOUND 2" or "SOUND 3" (~21)
PRESET EQ "HEAVY" (default), "SOFT", "CLEAR", "VOCAL" or "FLAT"
BASS –4 to +4 (default: 0)
Using the main unit
Turn [BASS].
TREBLE –4 to +4 (default: 0)
Using the main unit
Turn [TREBLE].
D.BASS "ON D.BASS" (default) or "OFF D.BASS"
SURROUND "ON SURROUND" or "OFF SURROUND" (default)
Note:
Changed settings will be kept until it is changed again, unless otherwise indicated.
Saving the sound settings
You can save the current sound effects (up to 3 combinations)
Preparation
Select the sound effects.
1
Press [SETUP] repeatedly to select "SAVE MY SOUND".
2
Press [R, T] to select a sound setting number and then press [OK].
"SAVED" is shown.
The new setting replaces the one existing in the same sound setting number.
To recall the setting
1
Press [SOUND] to select "MY SOUND".
2
Press [R, T] to select the sound setting number and then press [OK].
21