15) Route the MFP antenna cable [1] through the three wire saddles [3].
- Do not close the wire saddles yet.
- Make sure to route the cable without cable loosening.
[2]
[3]
F-2-187
16) Connect the MFP antenna cable [1] with the wireless LAN board termi-
nal [2].
[1]
F-2-188
17) Fix the two cables [1] removed in step 1) and the MFP antenna cable [2]
through the 5 wire saddles.
[1]
[2]
[1]
[3]
F-2-189
18) Connect the power cable to the power plug.
19) Turn ON the main power switch.
22) Check if the wireless LAN board is recognized.
Enter service mode.
Select COPIER > DISPLAY > ACC-STS > PCI.
If "Wireless LAN Board" is displayed, that means that the wireless LAN
board is correctly recognized.
2. Output the user data list
Output the user data list in order to check that the wireless LAN has been rec-
ognised.
1) Select: [Additional Functions] > [Report Settings] > [Extension Card] in
the Print List > [User Data List].
2) After a message is displayed, select 'Yes' to output the user data list.
2.17.5 Affixing the Label
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
1) Affix the wireless LAN display label [2] on the indicated position [1] of
the rear upper cover.
F-2-190
2.18 Installing the Power Supply
2.18.1 Checking the Contents
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
Prepare the following parts because each part of the Option Power Supply is
assigned as service part.
Chapter 2
[2]
[1]
0018-6184
[1]
[2]
0018-6933
2-45