Advertisement

Quick Links

Introducing the Cisco 1121 Secure Access
Control System Hardware
This chapter gives an overview of the Cisco Secure Access Control System (CSACS-1121) hardware. It covers the
appliance hardware, major components, controls, connectors, and front- and rear-panel LED indicators.
This chapter contains:
Product Overview, page 1
Hardware Features, page 3
Regulatory Compliance, page 7
Product Overview
This section describes the power requirements, rack-mount hardware kit, and features of the CSACS-1121 Series
appliance.
This section contains:
CSACS-1121 Series Appliance Overview, page 1
Product Serial Number Location, page 2
Cisco Product Identification Tool, page 3
CSACS-1121 Series Appliance Overview
The CSACS-1121 Series appliance (see
appliance weighs from 24.25 lb (11.0 kg) to 28.0 lb (12.7 kg). It measures 1.75 inches high x 17.3 inches wide x
22.0 inches deep (44.5 mm x 440.0 mm x 559.0 mm). These dimensions do not include the rack handles.
Figure 1
Cisco 1121 Secure Access Control System Front View
The CSACS-1121 Series appliance is configured for AC-input power and has a single auto-ranging AC-input power
supply, mounted in a standard 19-inch (48.3 cm), 4-post equipment rack (using the rack-mount brackets provided). The
CSACS-1121 features include:
Microprocessor—Intel Core 2 Duo 2.4-GHz processor with an 800-MHz front side bus (FSB) and 2 MB of Layer 2
cache.
Four synchronous dynamic RAM (SDRAM) slots that are installed with 4 GB.
Figure 1 on page
1) is contained in a standard shelf-rack enclosure. The
Cisco Systems, Inc.
www.cisco.com
1
Cisco 1121 Secure
Accrss Control System
CISCO

Advertisement

Table of Contents
loading

Summary of Contents for Cisco 1121

  • Page 1 Introducing the Cisco 1121 Secure Access Control System Hardware This chapter gives an overview of the Cisco Secure Access Control System (CSACS-1121) hardware. It covers the appliance hardware, major components, controls, connectors, and front- and rear-panel LED indicators. This chapter contains: ...
  • Page 2: Product Serial Number Location

    Note: The rack-mount hardware kit does not include a 2-post equipment rack. Product Serial Number Location The serial number label is located on the front panel of the CSACS-1121 Series appliance, at the lower Left. Figure 2 on page 3...
  • Page 3: Cisco Product Identification Tool

    You can access the CPI tool at: http://tools.cisco.com/Support/CPI/index.do To access the CPI tool, you require a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at: http://tools.cisco.com/RPF/register/register.do...
  • Page 4 USB 2 connector Hard disk drive activity LED CD-eject button Locator LED CD drive activity LED LEDs on the CSACS-1121 Front Panel Table 1 on page 5 describes the LEDs located on the front panel of the CSACS-1121 Series appliance.
  • Page 5 Introducing the Cisco 1121 Secure Access Control System Hardware Hardware Features Table 1 Front-Panel LEDs Color State Description Appliance power Green Power on Green Blinking Sleep (standby) Power off Hard disk drive Green Random blinking Hard disk drive activity No hard disk drive activity Reset Button —...
  • Page 6: Input/Output Ports And Connectors

    USB 3 connector Video connector USB 4 connector LEDs on the CSACS-1121 Rear Panel Table 2 on page 6 describes the LEDs located on the rear panel of the CSACS-1121 Series appliance. Figure 5 on page 6 shows these LEDs. Table 2...
  • Page 7: Regulatory Compliance

    Introducing the Cisco 1121 Secure Access Control System Hardware Regulatory Compliance Regulatory Compliance For regulatory compliance and safety information, see Regulatory Compliance and Safety Information for Cisco Secure Access Control System. For more information, see Obtain Documentation and Submit a Service Request, page...
  • Page 8 Introducing the Cisco 1121 Secure Access Control System Hardware Regulatory Compliance...

Table of Contents