Table of Contents
Advertisement
Level 1
Level 2
WLAN
TCP/IP
Setup Wizard
WLAN Assistant
WPS
WPS w/ PIN Code -
WLAN Status
MAC Address
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device
Information
Status
Information
I/F Enable
Message from
Message from
Brother
Brother
Status
Web Connect
Proxy Settings
Settings
Level 3
Level 4 Descriptions
APIPA
-
IPv6
-
-
-
-
-
-
-
-
Status
-
Signal
-
SSID
-
Comm. Mode
-
-
-
-
-
-
-
-
-
-
-
Device Name
-
SSID
-
IP Address
-
Status
-
Signal
-
-
-
-
-
-
-
Proxy
-
Connection
Address
-
Port
-
User Name
-
Password
-
Set the machine to allocate the IP address
from the link-local address range
automatically.
Turn the IPv6 protocol on or off. For more
detailed information, go to your model's
FAQs & Troubleshooting page on the
Brother support website at
support.brother.com.
Configure your wireless network settings
manually.
Configure your wireless network settings
using the Brother installation disc.
Configure your wireless network settings
using the one-button push method.
Configure your wireless network settings
using WPS with a PIN.
View the current wireless network status.
View the current wireless network signal
strength.
View the current SSID.
View the current Communication mode.
View the machine's MAC address.
Configure your Wi-Fi Direct network settings
using the one-button push method.
Configure your Wi-Fi Direct network settings
using WPS with a PIN code.
Configure your Wi-Fi Direct network settings
manually.
Set your machine as the Group Owner.
View your machine's device name.
View the Group Owner's SSID.
When the machine is not connected, the
LCD displays Not Connected.
View your machine's current IP Address.
View the current Wi-Fi Direct network status.
View the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner,
the LCD always indicates a strong signal.
Turn the Wi-Fi Direct connection on or off.
Display messages and notifications from
Brother.
Change the Web connection settings.
334
Advertisement
Table of Contents
