Vm(Dtmf) Group-System Setting [3-8-1] - Panasonic KX-TDA50 Features Manual

Feature Guide References
1.19.1 Voice Mail (VM) Group
Group Name
Specifies the name of the VM (DPT) group, which will be shown on the display of the extension that has
called the VM (DPT) group. As for the available characters, refer to the character code table described in
section 3.2.1 Installing and Starting KX-TDA50 Maintenance Console.
Default
Not stored.
Value Range
Max. 20 characters
Programming References
4.7.13 Extension Port [1-5]
Feature Guide References
1.19.1 Voice Mail (VM) Group
4.9.12 VM(DTMF) Group—System Setting [3-8-1]
A Panasonic Voice Processing System (VPS) with DTMF Integration can be connected to SLT ports of the
PBX. The SLT ports that are connected to the VPS are called a VM (DTMF) Group. A maximum of 2 VM
(DTMF) Groups can be programmed.
VM DTMF Status Signal—Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is ringing.
Default
1
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming References
None
Feature Guide References
1.19.1 Voice Mail (VM) Group
1.19.3 Voice Mail DTMF Integration
VM DTMF Status Signal—Busy Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is busy.
4.9 Groups [3]
Feature Guide 477