Connecting To A Tv - Sanyo Xacti VPC-C4 Instruction Manual

CONNECTING TO OTHER EQUIPMENT

Connecting to a TV

Use the supplied S-AV interface cable to connect the DIGITAL/AV
terminal of the docking station to the audio and video terminals of a TV.
i After connecting the camera to the television, set the TV input switch to
VIDEO input.
i When the camera's monitor unit is closed and the camera is set in the
docking station, press the CAMERA/CHARGE button on the docking
station to light the CAMERA indicator.
i The remote control unit can be used for playback.
i The playback method is the same as when viewing images on the LCD
monitor.
i The same playback procedure as when playing back with the camera is
used to play back audio recordings as well.
To AC adaptor/
charger
CAUTION
When connecting to a standard video input terminal
i Do not connect to a S-VIDEO INPUT terminal, as doing so may cause the
TV to automatically switch to the S-VIDEO input mode, and no image will
appear on the TV monitor.
i Do not connect to a VIDEO INPUT terminal, as doing so may cause the TV
to automatically switch to the video input mode, and no image will appear
on the TV monitor.
139
English
DIGITAL/AV terminal
Supplied S-AV interface cable
White plug: To Audio Input (LEFT) terminal
Red plug: To Audio Input (RIGHT) terminal
Yellow plug:
To Video Input terminal
S terminal