Sharp GP1A173LCS3F Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Transmitter
  5. GP1A173LCS3F
  6. Manual
Sharp GP1A173LCS3F Manual

Sharp GP1A173LCS3F Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GP1A173LCS3F
Description
GP1A173LCS3F is a standard, low voltage operation,
OPIC output, transmissive photointerrupter with
opposing emitter and detector in a case, providing
non-contact sensing.
For this family of devices, the emitter and detector are
inserted in a case, and a 3-pin connector is included to
allow remote-mount or off-board designs.
Features
1. Transmissive with OPIC output
2. Highlights :
Special position hooks compatible with 3 different
Plate thicknesses (1.0, 1.2, 1.6mm)
Snap insertion
3. Key Parameters :
Low operating voltage : 2.7 to 5.5V
Gap Width : 5mm
Slit Width (detector side) : 0.5mm
Package : 17 × 12.8 × 8mm (without connector
and hooks)
Connector : Tyco Electronics JAPAN G.K.
(173977-3 and 179228-3)
4. RoHS directive compliant
*"OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and
a signal-processing
Gap : 5.0mm, Slit : 0.5mm,
Low voltage operation,
*OPIC Output, Snap-in type
Compact Transmissive
Photointerrupter with connector
Agency approvals/Compliance
1. Compliant with RoHS directive (2002/95/EC)
Applications
1. General purpose detection of object presence or
motion.
Example : PPC, FAX, Printer
1
GP1A173LCS3F
Sheet No.: OP14021EN

Advertisement

Table of Contents
loading

Summary of Contents for Sharp GP1A173LCS3F

  • Page 1 Package : 17 × 12.8 × 8mm (without connector and hooks) Connector : Tyco Electronics JAPAN G.K. (173977-3 and 179228-3) 4. RoHS directive compliant *”OPIC”(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing Sheet No.: OP14021EN...

  • Page 2: Internal Connection Diagram

    GP1A173LCS3F Internal Connection Diagram Vout Outline Drawing No. CY15164i02 Unit : 1/1 mm Note) 1. Unspecified tolerance shall be followed the list below. 2. Dimensions in parenthesis are shown for reference. 3. Coupling and contact : CT receptacle connector (173977-3 and 179228-3) by Tyco Electronics Japan G.K.

  • Page 3: Absolute Maximum Ratings

    GP1A173LCS3F Absolute maximum ratings Ta=25°C Parameter Symbol Rating Unit Remark Supply voltage -0.5 to +6 Output voltage Vout -0.5 to +6 Output transistor between collector and emitter Output current Output transistor collector current *1 Operating temperature Topr -30 to +95 °C...
  • Page 4 GP1A173LCS3F Fig.1 Output current vs. ambient temperature Sheet No.: OP14021EN...
  • Page 5 GP1A173LCS3F Supplements ODS materials This product shall not contain the following materials. Also, the following materials shall not be used in the production process for this product. Materials for ODS : CFC , Halon, Carbon tetrachloride 1.1.1-Trichloroethane (Methyl chloroform) Specified brominated flame retardants Specified brominated flame retardants (PBB and PBDE) are not used in this device at all.
  • Page 6 GP1A173LCS3F Notes Truth Table (In case of external addition pull-up resistance to Vout terminal) Light beam Output Interrupted High Uninterrupted Power supply line In order to stabilize power supply line, connect a by-pass capacitor of more than 0.01 F between Vcc and GND near the device.
  • Page 7 Unit : 1/1mm (Drawing No. CY15165i06) *1 We recommend to fix GP1A173LCS3F at punching side on the fixing plate (metal plate). *2 Please decide the final dimensions at your side after confirmation by the actual applications, Because mounting efficiency and mounted stabilization are dependent on mounting plate corner-R and punched state.
  • Page 8 GP1A173LCS3F Parts This product uses the below parts. Light detector (Quantity : 1) (Using a silicon photodiode as light detecting portion, and a bipolar IC as signal processing circuit.) Maximum sensitivity Sensitivity Response time Type wavelength (nm) wavelength (nm) ( s)

  • Page 9: Packing Specification

    GP1A173LCS3F Packing specification Package Name Material Quantity Packing case Corrugated cardboard 1/1000 Corrugated cardboard 6/1000 Tray Polystyrene 1/200 Kraft tape Packing method 1) 5 products are put in 1 pocket. The longer direction of the product is arranged in the arbitrary direction.

  • Page 10: Important Notices

    SHARP takes no aircraft, trains, automobiles, etc.) responsibility for any problems related to any intellectual --- Traffic signals property right of a third party resulting from the use of SHARP's --- Gas leakage sensor breakers devices. --- Alarm equipment --- Various safety devices, etc.

Table of Contents