Table of Contents
Advertisement
3
Chapter
UTILITY STITCHES
CAUTION
• Before replacing the presser foot, be sure to
touch
to lock all keys and buttons,
otherwise injuries may occur if the "Start/
Stop" button or any other button is pressed
and the machine starts. For details on changing
the presser foot, refer to "Replacing the Presser
Foot" on page 45.
Straight Stitches
Memo
• For details on stitch patterns, refer to "STITCH
SETTING CHART" on page 197.
1 Left needle position
2 Middle needle position
Changing the Needle Position (Left or Middle
Needle Position Stitches Only)
When you select left or middle needle position stitches,
you can use
and
change the position of the needle. Match the distance
from the right edge of the presser foot to the needle with
the L/R Shift, then align the edge of the presser foot with
the edge of the fabric during sewing for an attractive
finish.
a
VARIOUS STITCHES
in the L/R Shift display to
1 L/R Shift
Example: Left/Middle needle position stitches
12.0 mm
8.5 mm
(approx. 1/
(approx. 5/
2 inch)
16 inch)
Memo
• Stitch Q-01 will not permit using the L/R Shift
function.
• When [Width Control] in the Sewing settings screen
is set to [ON], the needle position of a straight
stitch can be changed with the sewing speed
controller.
And use the foot controller to operate the machine.
a
1 Shift the needle position to the left.
2 Shift the needle position to the right.
UTILITY STITCHES
6.5 mm
5.0 mm
(approx. 1/
(approx. 3/
4 inch)
16 inch)
3
67
Advertisement
Table of Contents
