Honda ODYSSEY 2020 Owner's Manual page 669

*
Fog Light Bulbs
When replacing, use the following bulbs.
Models with halogen headlights
Fog Light: 35 W (H8 for halogen bulb type)
Models with LED headlights
Fog Light: LED type
Screws
Bulb
Tab
Coupler
* Not available on all models
1. Turn the steering wheel all the way to the
opposite side from the fog light being
replaced.
Passenger side: Turn the steering wheel
to the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the screws, and pull the inner
fender back.
3. Push the tab to remove the coupler.
4. Rotate the old bulb counter-clockwise to
remove.
5. Insert a new bulb into the fog light
assembly and turn it clockwise.
6. Insert the coupler into the connector of the
bulb.
uuReplacing Light BulbsuFog Light Bulbs
*
1Fog Light Bulbs
Models with halogen fog lights
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
When replacing a halogen bulb, handle it by its
plastic case, and protect the glass from contact with
your skin or hard objects. If you touch the glass, clean
it with denatured alcohol and a clean cloth.
Models with LED headlights
Fog lights are LED type. Have an authorized Honda
dealer inspect and replace the light assembly.
*
667