Dell G2524H User Manual page 57

When the monitor enters the Standby mode, the following message will appears:
Activate the computer and wake up the monitor to gain access to the OSD.
When you increase the Brightness level above the factory default setting for the first
time, the following message appears:
If you press any button other than the power button, the following messages appear
depending on the selected input:
If either HDMI, DP1 and DP2 input is selected and the corresponding cable is not
connected, a floating dialog box as shown below appears:
Dell 25 Gaming Monitor
Going into Standby mode...
1
Dell 25 Gaming Monitor
Adjusting to this value will increase power consumption above the
default level. Do you want to continue?
Yes
Dell 25 Gaming Monitor
No HDMI signal from your device.
Press any key on the keyboard to wake up.
If there is no display, press the monitor joystick to open up the
Menu and select the correct input source.
Dell 25 Gaming Monitor
No HDMI Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/G2524H
G2524H
No
G2524H
G2524H
G2524H
or
Operating the monitor
│
57