Circuit Adjustments; Electrical Adjustments - Sony TRINITRON KV-32HQ100B Service Manual

4-1. Electrical Adjustments

Service adjustments to this model can be performed using the
supplied remote Commander RM-940.
Programming the Remote Commander for
Operation in Service Mode
1. Press and hold the left Mode Select button
until the VCR and DVD LED's flash.
2. Press 99999. The TV LED should light.
The remote commander is now set to
Service Mode.
3. To return the remote commander to normal operation mode
repeat step 1. then press 00000. The TV LED should light.
The remote commander is now set to normal mode.
Setting the TV into Service Mode
1. Program the remote commander for operation in Service
Mode as described above.
2. Turn on the TV main power switch.
3. Press the video standby button
commander twice.
'TT ' will appear in the upper right corner of the screen.
Other status information will also be displayed.
4. Press 'MENU' on the remote commander twice to obtain the
following menu on the screen.
A E 7 S e r v i c e M e n u
M o d e l S e t t i n g s
F e a t u r e s
D e v i c e S e t t i n g s
M o n i t o r
Up: Down: Next:
Table.4-1
5. Move to the corresponding adjustment item using the
up or down arrow buttons on the Remote Commander.
6. Press the right arrow button to enter into the required menu item.
7. Press the 'Menu' button on the Remote Commander to quit the
Service Mode when all adjustments have been completed.
Note :
· After carrying out the service adjustments, to prevent the
customer accessing the 'Service Menu' switch the TV set
OFF and then ON.
·
Certain menu items are only available in production mode.
All manuals and user guides at all-guides.com
SECTION 4
on the remote
Page 1/1

CIRCUIT ADJUSTMENTS

Model Settings
'Model Settings' is a sub menu of the 'Service Menu'.
This menu stores a list of models that are supported by the chassis.
Press the cursor right key to move to the model selection then press
the cursor up or down keys to scroll through the models available.
Press the OK key to select the model highlighted by the cursor.
The model setting is stored in flash and is used by the software for
model dependent features or parameters to be available.
The cursor left key will return to 'Service Menu'.
M o d e l S e t t i n g s
M o d e l
Up: Down: Back:
Table.4-2
Features
'Features' is a sub menu of the 'Service Menu'.
This menu is used to set up the digital camera and memory stick for
those models which have this accessory and functions.
Press the cursor right key to move to the selection field then press the
cursor up or down keys to scroll to Yes or No. Press the OK key to
select the required option.
The cursor left key will return to 'Service Menu'.
F e a t u r e s
C a m e r a
M e m o r y S t i c k
Up: Down: Back:
Table.4-3
- 27 -
3 2 H Q 1 0 0
Edit: Page 1/1
N o
N o
Select: Page 1/1