Sony Bravia KDL-75W850C Reference Manual page 8

AC power cord (Mains lead)
Handle the AC power cord (mains
lead) and outlet (mains socket) as
follows in order to avoid any risk of
fire, electrical shock or damage
and/or injuries:
Insert the plug fully into the AC
power outlet (mains socket).
Operate the TV set on a 220 V AC
supply only.
When wiring cables, be sure to
unplug the AC power cord (mains
lead) for your safety and take care
not to catch your feet on the
cables.
Disconnect the AC power cord
(mains lead) from the AC power
outlet (mains socket) before
working on or moving the TV set.
Keep the AC power cord (mains
lead) away from heat sources.
Unplug the AC power plug (mains
plug) and clean it regularly. If the
plug is covered with dust and it
picks up moisture, its insulation
may deteriorate, which could
result in a fire.
Note
•Do not pinch, bend, or twist the AC
power cord (mains lead)
excessively.
The core conductors may be
exposed or broken.
•Do not modify the AC power cord
(mains lead).
•Do not put anything heavy on the
AC power cord (mains lead).
•Do not pull on the AC power cord
(mains lead) itself when
disconnecting the AC power cord
(mains lead).
8
GB
•Do not connect too many
appliances to the same AC power
outlet (mains socket).
•Do not use a poor fitting AC power
outlet (mains socket).
Prohibited Usage
Do not install/use the TV set in
locations, environments or
situations such as those listed
below, or the TV set may
malfunction and cause a fire,
electrical shock, damage and/or
injuries.
Location:
•Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel,
inside a vehicle, in medical
institutions, unstable locations,
near water, rain, moisture or
smoke.
•If the TV is placed in
the changing room of a
public bath or hot
spring, the TV may be
damaged by airborne sulphur, etc.
•For best picture quality, do not
expose the screen to direct
illumination or sunlight.
•Avoid moving the TV from a cold
area to a warm area. Sudden room
temperature changes may cause
moisture condensation. This may
cause the TV to show poor picture
and/or poor colour. Should this
occur, allow moisture to evaporate
completely before powering the TV
on.