Table of Contents
Advertisement
MAINTENANCE
PVT System
When to Use Low Range and High Range
Operating at speeds less than 7 MPH (11 km/h)
Towing heavy loads
Operating in rough terrain (swamps, mountains, etc.)
Operating at speeds greater than 7 MPH (11 km/h)
PVT Drying
There may be some instances when water is accidently ingested into the
PVT system. Use the following instructions to dry it out before
operating.
1. Position the vehicle on a level surface.
2. Remove the drain plug. Allow the water to drain completely.
Reinstall the drain plug.
3. Start the engine. Place the transmission in PARK.
4. Apply varying throttle for 10-15 seconds to expel the moisture and
air-dry the belt and clutches. Do not hold the throttle wide open for
more than 10 seconds.
5. Allow the engine RPM to settle to idle speed, then shift the
transmission to the lowest available range.
6. Test for belt slippage. If the belt slips, repeat the process.
7. Take the vehicle to your dealer for service as soon as possible.
108
Condition
Range to Use
Low
Low
Low
High
Advertisement
Table of Contents
