Table of Contents
Advertisement
4.3.12 Progress of programme
Progress of a running programme can be followed from the Programme Follow-up
indicator. At the beginning of every programme step, the relevant indicator light will turn
on and light of the completed step will turn off.
You can change the speed settings without stopping the programme flow while the
programme is running. To do this, the change you are going to make must be in a step
after the running programme step. If the change is not compatible, relevant lights will
flash for 3 times.
C
If the machine does not proceed to the spinning step, the Rinse Hold function might be
active or the automatic unbalanced load detection system might be activated due to the
unbalanced distribution of the laundry in the machine.
4.3.13 Loading door lock
There is a locking system on the loading door of the machine that prevents opening of
the loading door in cases when the water level is unsuitable.
Loading door light will start flashing when the machine is switched to Pause mode. The
machine checks the level of the water inside. If the level is suitable, the Loading Door
light turns off and the loading door can be opened within 1-2 minutes.
If the level is unsuitable, the Loading Door light remains on and the loading door cannot
be opened. If you are obliged to open the Loading Door while the Loading Door light is
on, you must cancel the current programme. See. "Cancelling the programme"
4.3.14 Changing the selections after programme has started
Switching the machine to pause mode
Press the Start / Pause button to switch the machine to pause mode while a programme
is running. The light of the step which the machine is in starts flashing in the Programme
Follow-up indicator to show that the machine has been switched to the pause mode.
Additionally, when the loading door is openable, the Loading Door light turns off
completely.
Changing the speed settings
You can change the speed settings of the programme that is currently running. See
"Speed selection".
C
If no change is allowed, the relevant light will flash 3 times.
Adding or taking out laundry
1. Press Start / Pause button to switch the machine to pause mode. The programme
follow-up light of the relevant step during which the machine was switched into the
pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in speed settings, if necessary.
6. Press Start / Pause button to start the machine.
20 / EN
Washing Machine / User's Manual
Advertisement
Table of Contents
