Network Client Mode (Ncm); Ftp Server - Sony PXW-Z280 V5.0 Setup Manual

3.2. Network Client Mode (NCM)

Check the C3 Portal or Network RX Station settings information before configuring the camcorder's
network client mode settings.
The following information is required.
• URL or IP address for Connection Control Manager (CCM)
• Port number
• User name
• Password
The following operations can also be configured.
• Streaming
• Controlling the camera from the CCM UI
• Applying camera settings once only or continuously using an "ALL File".
Network Client Mode can be registered in NCM Settings1 to 3, and the name to be displayed for each preset
can be set.
You can also change the name from the preset number (for example, "MyCCM").

3.3. FTP Server

An FTP server must be prepared for file transfers.
The following information is required.
• Server URL or IP address
• User name
• Password
• Whether FTP connection operates in active or passive mode
For secure transfer, the use of FTPS is recommended.
15