D-Link AirPremier AG DWL-7200AP Manual page 42

Using the AP Manager (continued)
Device Configuration>Security>IEEE802.11a & IEEE802.11g
The Security tab contains the WEP configuration settings on the intial page. If you select
WPA as the authentication type, an additional tab will appear with the WPA configuration
options based on your selection.
• Authentication Type: Select from the pulldown menu the type of authentication to
be used on the selected device(s).
• Encryption: Enable or disable encryption on the selected device(s).
• Active Key Index: Select which defined key is active on the selected device(s).
• Key Values: Select the key size (64-bit, 128-bit, or 152-bit) and key type (HEX or
ASCII) and then enter a string to use as the key. The key length is automatically
adjusted based on the settings you choose.
All manuals and user guides at all-guides.com
42