Table of Contents
Advertisement
Chapter 1. ThinkSystem NE2572O
This Installation Guide provides information about the Lenovo RackSwitch Lenovo
ThinkSystem NE2572O RackSwitch (referred to as NE2572O throughout this
document).
This Installation Guide provides information about the Lenovo ThinkSystem
NE2572O RackSwitch (referred to as NE2572O throughout this document).
The NE2572O uses a wire‐speed, non‐blocking switching fabric that provides
simultaneous wire‐speed transport of multiple packets at low latency on all ports.
Port Configuration
The NE2572O contains the following ethernet ports:
Transceiver Configuration
QSFP+ ports can be populated with optical QSFP+ modules or passive Direct‐Attach
Cables (DACs), including those that allow the port to be used as four 25 GbE SFP+
ports.
Orientation, Airflow, and Redundancy
The NE2572O is 1U in height and can be mounted horizontally or vertically,
depending on your application. Mounting options are available for a variety of rack
systems.
For superior reliability, the NE2572O uses redundant, hot‐swap power supply
modules and six hot‐swap fan modules. Module options are available for
rear‐to‐front airflow.
Management
You can manage the switch through the local console port, or through a remote
network connection.
© Copyright Lenovo 2018
All manuals and user guides at all-guides.com
Forty‐eight 25 Gigabit Ethernet (GbE) Small Form Pluggable 28 (SFP28) ports
Six 100 GbE Quad Small Form Pluggable 28 (QSFP28) ports, each of which can
optionally be used as four 10GbE SPF+ ports, or four 25GbE SPF28 ports, or two
50GbE QSPF28 ports, or one 40GbE QSPF+ port
15
Advertisement
Table of Contents
