Using The Tv Buttons On The Remote Control - Samsung CHT-500 Instruction Manual

VCR
GB
2
4
4
5
5
44

Using the TV Buttons on the Remote Control

Your DVD-VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible, follow the
instructions below.
1
2
3
You can then control the television using the following buttons.
Button
6
TV STANDBY/ON
TV or VCR
INPUT SEL.
VOL
PROG/TRK
MUTE
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand Codes
SAMSUNG 01 to 06
AKAI 09, 23
GRUNDIG 09, 17, 21
LOEWE 02
PANASONIC 08, 23 to 27
Result: If your television is compatible with the remote control,
it will switch off. It is now programmed to operate with
the remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
When you change the batteries in the remote control, you
must reprogramme the code, following the same
procedure.
Used to switch the television on and off.
Used to switch between the TV and VCR
modes.
Used to select an external source.
+ –
or Used to adjust the volume of the television.
Used to select the required programme.
( or )
Used to mute the volume of the television.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
Brand
PHILIPS
SABA
SONY
THOMSON
TOSHIBA
Function
Codes
02, 20, 22
13, 14, 22 to 24
15, 16
13, 14, 24
07, 16 to 19, 21