Command Details - Brother PJ-600 Series Command Reference Manual

5.2. Command details

Name Invalid command
Syntax NULL
00 H
Description Skip
If data transmission should be stopped midway, send the "initialize" command after
sending the "invalid" command for the appropriate number of bytes to return to the
receiving state, where the print buffer is cleared.
Name Switch command mode
Syntax ESC + i + a + {n1}
1B H + 69 H + 61 H + {n1}
Description Switches between the machine's command modes. A machine that receives this
command operates in the specified command mode until the machine is turned off.
Definition of {n1}:
0：ESC/P・Raster （default）
1: Maintenance Mode
3：P-touch Template
Name Initialize
Syntax ESC + @
1B H + 40 H
Description Initializes the print buffer.
Name Status information request
Syntax ESC + i + S
1B H + 69 H + 53 H
Description Status information is transmitted.
Name Set 2-ply mode
Syntax ESC +
1B H + 7E H + 70 H + {n1} + 00 H
Description Specifies whether or not the strobe time is extended and the print density is adjusted
when 2-ply paper is used.
Definition of {n1}:
0: Disable (default)
1: Enable
© 2015 Brother Industries, Ltd. All Rights Reserved.
Brother PJ-600/700/800 Series Command Reference 20
~ + p + {n1} + null