Page 1
Operator’s Manual 16 Gallon Wet/Dry Vacuum Model No. 125.12007 Safety Assembly CAUTION: Before using this Operation product, read this manual Maintenance and follow all its Safety Rules Parts and Operating Instructions. Español - página 16 Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A...
This ONE YEAR warranty is void if this product is ever used while providing commercial services or if rented to another person. For 90 DAY commercial and rental use terms, see the Craftsman warranty web page. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
starting, unplug power cord before Observe the following warnings that changing or cleaning fi lter. appear on the motor housing of your Vac: • Do not leave Wet/Dry Vac unattended DOUBLE INSULATED when plugged in. Unplug from outlet GROUNDING NOT REQUIRED. when not in use and before servicing.
Introduction This Wet/Dry Vac is intended for Read this operator's manual to vacuuming wet and dry materials and familiarize yourself with the product may be used as a blower. features and to understand the specific usage of your new Wet/Dry Vac. Table of Contents Section Page...
Assembly Remove entire contents of carton and check for parts inside the collection tank. Check each item against the Carton Contents List. If any parts are missing or damaged please call 1-800-469-4663 for replacement. Carton Content List Description ......Q t y. Vac Assembly ......
Assembly (continued) A Phillps head screw driver required. WARNING: Do not plug in power 6. Position the hose storage rack cord to power outlet, make sure as illustrated. Fully insert one end plug is disconnected before of the hose storage rack into the assembling the wet/dry vac.
Operation Vacuuming Dry Materials WARNING: Be sure to read, understand and apply all the information in the Important Safety Instructions section at the beginning of this operator's manual. Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the air.
Operation (continued) Vacuuming Liquids WARNING: Be sure to read, understand and apply all the information in the Important Safety Instructions section at the beginning of this operator's manual. Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the air.
Operation (continued) Blowing Feature WARNING: Always wear safety goggles complying with ANSI Z87.1 (or in Canada, CSA Z94.3) before using blower. WARNING: Keep bystanders clear from blowing debris. WARNING: Wear a dust mask if blowing creates dust that might be inhaled. This Wet/Dry Vac has blowing capabilities.
Maintenance Emptying the Collection Tank 7. Place power head on collection tank and 1. Verify that the power cord is secure latches. disconnected from the outlet. (Fig. 1) 2. Disconnect the hose from the vacuum. (Fig. 2) NOTICE! The filter included is made of 3.
Installing A Replacement Cartridge Filter Craftsman Filter with Rubber Top Craftsman Filter with Plastic Top THIS VACUUM CLEANER IS DESIGNED TO USE CRAFTSMAN CARTRIDGE FILTERS. 1. Carefully slide the Craftsman cartridge 1. Carefully slide the Craftsman cartridge filter over the filter cage and press...
Maintenance (continued) Installing & Cleaning Foam Sleeve Filter Installing Foam Sleeve Filter Cleaning Foam Sleeve Filter 1. Verify that the power cord is 1. With the removed power head in the disconnected from the outlet. (Fig. 1) upside down position, carefully 2.
Troubleshooting WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK UNPLUG BEFORE TROUBLESHOOTING. Problem Possible Causes Corrective Action Vacuum will not operate 1) No power supply. 1) Check power supply – cord, breakers, fuses. 2) Unplug and check the power 2) Faulty power cord. cord.
Repair Parts 125.12007 16 Gallon Wet/Dry Vac Always order by part number, not by key number. Always mention the model number when ordering parts. The model number is found on the serial plate located on the vacuum. To order parts, call 1-800-469-4663.
Page 15
Repair Parts (Continued) 16 Gallon Wet/Dry Vac...