Table of Contents
Advertisement
4-6 Setup Using the OPERATION Menu
Item
Condition to unlight
ND
Type of ND filter (one or more can be
specified among 1 to 5)
CC
Type of ND filter (one or more can be
specified among A to E)
WHITE
White balance memory (one or more can
be specified among P(PRST), A, and B)
D5600K
ON or OFF
GAIN
GAIN switch position L, M, or H
SHUTT
ON or OFF
FAN
AUTO 1, AUTO 2, MIN or MAX
EXT
ON or OFF
FORMAT
Video format 59.94I, 60I, 30PsF,
29.97PsF, 50I, 25PsF, 24PsF, or
23.98PsF
The "?" mark changes back to the arrow marker
(c) .
Example:
To light an exclamation mark (!) when the ND
filter 1 or 2 is selected, select ON for the item ND
in the IND column, then display "- - 3 4 5" in
the NORMAL column.
4
Repeat step 3, to make other settings as required.
5
When the menu operation is completed, set the
DISPLAY switch to ON.
The menu display disappears from the viewfinder
screen, and the display indicating the current status of
the camera appears along the top and bottom of the
screen.
4-6-3 Setting Marker Display
The MARKER page of the OPERATION menu is
used to turn ON or OFF the display of the various
markers, mask, and effective pixel area. It is also used
to set display areas and display positions.
1
Set the DISPLAY switch to MENU.
2
Rotate the MENU SEL knob/ENTER button to
display the MARKER page, and push the MENU
SEL knob/ENTER button.
4-18(E)
Chapter 4 Adjustments and Settings for Recording
MARKER page
<MARKER>
MARKER
CENTER
SAFETY ZONE:
EFFECT
ASPECT MODE:
MASK
VAR WIDTH :
SAFETY
The current setting of each item appears to the
right of the item.
Item
Contents
MARKER
a)
Toggles all markers on or off.
b)
CENTER
To display the center marker, set to ON
and select the type of center marker (1 to
4).
SAFETY
To display the safety zone marker, set to
b)
ZONE
ON and select the safety zone area (80%,
90%, 92.5%, or 95%).
EFFECT
Set to ON to display the effective pixel
area.
ASPECT
Select the aspect mode among from 16:9,
MODE
c)
15:9, 14:9, 13:9, 4:3, VAR H, VAR V,
1035, VISTA1, VISTA2.
b) c)
MASK
To make the areas out of the selected
aspect maker dimmer, set to ON and
adjust the mask level (0 to 100%).
VAR
Effective only when VAR H or VAR V is
c)
WIDTH
selected for ASPECT MODE.
VAR H: You can change the aspect size
horizontally.
VAR V: You can change the aspect size
vertically.
SAFETY
b) c)
Set the safety marker for the selected
aspect mode.
a) The DISPLAY/ASPECT switch on the viewfinder
allows you to display or not to display all markers
when MARKER is set to ON regardless of the setting
of the CENTER, SAFETY ZONE, EFFECT and
ASPECT MODE on this page.
b) When the CA-905L is connected, the setting at the
CA-905L is indicated in parentheses: (ON) or (OFF)
c) When the CA-905L is connected and its VF SCAN
switch is set to "4:3," "- - -" is displayed.
3
Perform the desired settings for each item.
1 Turn the MENU SEL knob/ENTER button to
move the arrow marker (c) to the item you
want to set, then press the MENU SEL knob/
ENTER button.
3
c
:
ON
:
ON
3
ON
90.0%
: OFF
4:3
: OFF
50
--
: OFF
90.0%
Advertisement
Chapters
Table of Contents
