Table of Contents
Advertisement
Network
Password
By controlling connection with password setting, it is
z
possible to prevent an external device from accidentally
connecting and interrupting projection images, etc.
Set to [On] to perform password check when connecting
z
with the projector using "Wireless Manager mobile edition
6.0". (Default : [Off])
When using the deliver image to all function or the
z
delivered image deletion function of the "Multi Projector
Monitoring & Control Software", image cannot be
delivered to the projector with password setting set to
[On]. To use these image delivery functions, set it to [Off].
1 )
Press ▲ ▼ to select [Password]. Press
<ENTER> button or the ► button to
access to the submenu.
2 )
Press ▲ ▼ to select [Password] and
press the <ENTER> button.
Select [On] or [Off] with ▲ ▼buttons.
3 )
Press ▲ ▼ to select [Password change],
and press <ENTER> button.
Select characters with the ▲ ▼◄►
buttons and press the <ENTER>
button to enter the password.
Select [BS] to delete one character selected
with the cursor in the input box and press the
<ENTER> button.
4 )
After inputting the password, select
[OK] using the ▲ ▼◄► buttons and
then press <ENTER> button.
S elect [Cancel] to undo the changes and then
press the <ENTER> button.
Network control
Set when you want to control the projector from a
computer connected to the network.
1 )
Press ▲ ▼ to select [Network control].
2 )
Press <ENTER> button to select [On]
or [Off] with the ▲ ▼ buttons.
70
- ENGLISH
Live mode cut in
Set this [On] to allow interrupt of the Live mode by
other users, or to allow delivery of images by the
"Multi Projector Monitoring & Control Software",
while the Live mode is active (sending image) by the
"Wireless Manager mobile edition 6.0". For details,
refer to "Wireless Manager mobile edition 6.0"
operating manual.
1 )
Press ▲ ▼ to select [Live mode cut in].
2 )
Press <ENTER> button to select [On]
or [Off] with the ▲ ▼ buttons.
Note
If you use the "Wireless Manager mobile edition 6.0"
z
and the "Multi Projector Monitoring & Control Software"
on the same computer at the same time, the function
of delivering image to all may not be available. If you
want to use them at the same time, please use another
computer with respective software.
Multi-live
Switch to the Multi-live mode when using the
"Wireless Manager mobile edition 6.0". See the
"Wireless Manager mobile edition 6.0" operation
manual for details.
1 )
Press ▲ ▼ to select [Multi-live].
2 )
Press <ENTER> button.
Network status
Displays the current network status.
1 )
Press ▲ ▼ to select [Network status].
2 )
Press <ENTER> button or the ► button
to access to the submenu.
3 )
Each press of the ► button switches
wired LAN and wireless LAN.
Note
When the network number is set to [Off], [Network status]
z
is not display.
Advertisement
Chapters
Table of Contents
