Replacement Of Voltage Regulator Ic (Ic2010) - Panasonic SA-AKX92LM-K Service Manual

Step 10 Detach 27P FFC at the connector (CN2009) on Main
P.C.B..
Step 11 Detach 17P FFC at the connector (CN2004) on Main
P.C.B..
Step 12 Remove Main P.C.B..
Caution: During assembling, ensure that earth plate is
bended flat against the Main P.C.B. properly when inserted
to locators.
9.13. Replacement of Voltage Regu-
lator IC (IC2010)
• Refer to "Disassembly of Main P.C.B.".
9.13.1. Disassembly of Voltage Regulator
IC (IC2010)
Step 1 Desolder pins of the Voltage Regulator IC (IC2010) on
the solder side of Main P.C.B..
Step 2 Remove 1 screw.
Step 3 Remove the Voltage Regulator IC (IC2010) from the
Main P.C.B..
Caution: Avoid touching the Heatsink due to its high tem-
perature after prolong use. Touching it may lead to inju-
ries.