JVC AV-36D501 Service Manual page 32

AV-27D201
AV-32D201
STATIC CONVERGENCE ADJUSTMENT
1. Input a crosshatch signal.
2. Using 4-pole convergence magnets, overlap the red and blue
lines in the center of the screen (Fig.1) and turn them to
magenta (red/blue).
3. Using 6-pole convergence magnets, overlap the magenta
(red/blue) and green lines in the center of the screen and turn
them to white.
4. Repeat 2 and 3 above, and make best convergence.
DYNAMIC CONVERGENCE ADJUSTMENT
1. Move the deflection yoke up and down and overlap the lines in
the periphery. (Fig. 2)
2. Move the deflection yoke left to right and overlap the lines in the
periphery. (Fig. 3)
3. Repeat 1 and 2 above, and make best convergence.
After adjustment, fix the wedge at the original position.
Fasten the retainer screw of the deflection yoke.
Fix the 6 magnets with glue.
30
(FRONT VIEW )
(FRONT VIEW )
RED
BLUE
GREEN
RED
BLUE
(FRONT VIEW )
GREEN
RED BLUE
No. 51686
Fig.1
GREEN BLUE
RED
GREEN
BLUE
GREEN RED
Fig.2
GREEN
BLUE
RED
RED
GREEN
BLUE
BLUE
GREEN
RED
Fig.3