Table of Contents
Advertisement
When replacing any of these components, be sure to use only
manufacturer's specified parts shown in the parts list.
- The parenthesized indications in the Remarks columns specify the
areas or colour. (Refer to the cover page for area or colour)
Parts without these indications can be used for all areas.
- Capacitor values are in microfarads (
otherwise, P= Pico-farads (pF), F= Farads.
- Resistance values are in ohms, unless specified otherwise, 1K=
1,000 (OHM).
- The marking (RTL) indicates that the Retention Time is limited for
this items. After the discontinuation of this assembly in
production, the item will continue to be available for a specific
period of time. The retention period of a availability is dependent
on the type of assembly, and in accordance with the laws
governing part and product retention. After the end of this period,
the assembly will no longer be available.
- [M] Markings in the Remarks columns indicates parts supplied by
PAVCSG.
- The "(SF)" mark denotes the standard part.
13.1. Cabinet
13.1.1. Cabinet Parts Location
F) unless specified
13
Advertisement
Table of Contents
