EBU19187
Auxiliary DC jack
1. Auxiliary DC jack cap
2. Auxiliary DC jack
Auxiliary DC jack system capacity:
8.0 A (96 W)
ECB03760
NOTICE
Do not use any single electrical accessory or
combination of accessories that require more
than the stated capacity at any one time. This
may overload the circuit and cause the fuse to
blow.
TIP
When using a winch or other electrical accesso-
ries, the power taken from the DC jack must be re-
1
duced accordingly.
A 12-V accessory, such as a work light or radio
2
with the proper adapter, can be used when the
main switch is turned on. However, to prevent bat-
tery drain, use when the engine is running and the
headlights are turned off.
TIP
Turn off the accessory before plugging into/un-
When the auxiliary DC jack is not being used,
5-30
1. Start the engine.
2. Turn the headlights off.
3. Make sure the accessory is powered off.
4. Open the auxiliary DC jack cap.
5. Insert the accessory power plug into the jack.
6. Turn the accessory on.
plugging from the jack.
cover it with the cap.
5