Existing Network - D-Link DAP-1900 User Manual

Section 3 - Configuration

Existing Network

Select the type of existing network, either Ethernet or Wi-
Fi for the DAP-1900 to be connected. Select Ethernet if you
are connecting to your network via an Ethernet cable. Select
Wi-Fi if you are connecting to your network via a wireless
connection.
If Wi-Fi is selected, the following Wi-Fi Existing Network options will appear.
Wi-Fi Name (SSID) Type in the Wi-Fi Name of the network you would like to
extend.
Password Type in the password of the network you would like to extend.
Scan If Scan is selected, a window will pop up showing you available
Wi-Fi networks. You can choose the network you would like to
extend. Then enter the wireless network password if required.
Click OK to start connecting the selected network.
D-Link DAP-1900 User Manual
Wi-Fi - Existing Network
Existing Network
27