Manual Ratio Selection - Sharp AR-5316 X Operation Manual

4
Press the [AUTO IMAGE] key (
AUTO %
• If the ORIGINAL SIZE indicator blinks,
Note
change the orientation of the placed original.
• If the copy is made when a PRESET
RATIO selector indicator is blinking, the
copied image may run off the page.

MANUAL RATIO SELECTION

Copies can be reduced down to 25% or enlarged up to 400%. The [PRESET RATIO] selector keys (
pressed to quickly select a ratio from among eight preset ratios. In addition, the [Zoom] keys (
pressed to select the ratio in increments of 1%.
1
Place the original(s) in the document
feeder tray or on the document glass.
2
If the original is placed on the document
glass, select the original size. (p.18)
3
Use the [PRESET RATIO] selector
keys ( , ) and [Zoom] keys (
to select the desired copy ratio.
200%
141
122
115
100%
86
81
70
50%
ZOOM 25 400%
Press a [PRESET RATIO] selector key (
set the approximate ratio, then press the [Zoom] keys
( or ) to increase or decrease the ratio.
To decrease or increase the zoom ratio rapidly, hold
down the [Zoom] keys (
).
AUTO %
The AUTO IMAGE
indicator ( ) lights
AUTO %
up and the appropriate
ratio for the original size
and paper size is
selected. (The indicator
of the selected ratio will
light up.)
,
Selecting a preset ratio
Press the [PRESET
RATIO] selector key (
to move up through the
preset ratios.
Press the [PRESET
RATIO] selector key (
to move down through
the preset ratios.
Fine adjustment of the
ratio
Any ratio from 25% to
400% can be set in
increments of 1%.
or ) to
or ).
5
Set the number of copies and other
copy settings, and then press the
[START] key (
The copy will be delivered to the paper output
tray.
To cancel automatic ratio selection, press the
Note
[AUTO IMAGE] key (
When a [Zoom] key (
indicator will light up and the zoom ratio will appear in
the display for about two seconds.
• To verify a zoom setting without changing
Note
the zoom ratio, Hold down the [Copy ratio
display] key (
released, the display will return to the
number of copies display.
• If the copy is made when a PRESET
)
RATIO selector indicator or the ZOOM
indicator is blinking, the copied image may
run off the page. To ensure that the image
fits on the page, lower the copy ratio until
the indicator stops blinking and lights
)
steadily.
• If the PAPER SIZE indicator is not lit, there
is no appropriate paper. Load appropriate
paper in a paper tray. (p.14)
)
4
Set the number of copies and other
copy settings, and then press the
[START] key (
The copy will be delivered to the paper output
tray.
To return the ratio to 100%, press the
Note
[PRESET RATIO] selector key (
until the 100% indicator lights up.
COPY FUNCTIONS
).
) again.
AUTO %
, ) can be
, ) can be
or ) is pressed, the ZOOM
). When the key is
).
or
23
2
)