To Stop The Product; To Set The Product To Off; To Charge The Battery - Husqvarna AUTOMOWER 550 EPOS Operator's Manual

product is paused until either
in the Automower ® Connect app.

5.5 To stop the product

1. Push the STOP button on top of the product.
The product stops and the cutting motor stops.
Note:
When you push the START button again, the
product continues to operate in the same operating
mode as before.

5.6 To set the product to OFF

1. Push the STOP button.
2. Connect the product with Bluetooth
the app.
Note:
The product cannot be set to OFF if it is
not connected to the app with Bluetooth
3. Set the Main switch to the

5.7 To charge the battery

When the product is new or after long-term storage, the
battery can be empty. Charge the battery before you
start the product.
1. Set the Main switch to the
2. Put the product into the charging station until the
charging plates touch the contact plates.
3. Do a check that the product charges in the
®
Automower Connect app.
26 - Operation
Park or Start is selected
®
short-range in
®
.
0 position.
1 position.
1576 - 006 - 27.01.2023