Advertisement
4. OPERATION
4.1.
PREPARATION
WARNING! Before lifting ensure Section 1 safety instructions are strictly followed.
‰
4.1.1.
Prepare the vehicle as mentioned in the safety instructions ensuring the ground on which the jack is to stand is level and solid (not
tarmacadam).
4.1.2.
Position the jack saddle under the vehicle manufacturer's recommended lifting point.
4.2.
JACKING THE VEHICLE
4.2.1.
Turn the handle clockwise to bring the jack saddle into contact with the recommended lifting point.
4.2.2.
Ensure the jack is vertical before continuing to turn the handle clockwise and raising the vehicle to the required working height. Turn the
handle slowly and evenly to ensure no sudden movements of the vehicle.
4.3.
LOWERING THE VEHICLE
4.3.1.
Turn the handle anti-clockwise and lower the vehicle. Lower slowly to ensure no sudden movements of the vehicle.
SAFETY WARNING! Always lower in a slow and controlled manner and ensure there are no persons or obstacles beneath the vehicle, or
‰
in the path of its descent.
5.
MAINTENANCE
IMPORTANT: Only fully qualified personnel should attempt maintenance or repair.
5.1.
Keep the jack clean and lubricate all moving parts with acid free oil on a regular basis.
5.2.
Before each use check for broken, cracked, bent, or loose parts, or any visible damage to welds, saddle, frame and all parts including
nuts, bolts, pins and other fasteners. If any suspect item is found remove jack from service and take necessary action to remedy
the problem. DO NOT use the jack if believed to have been subjected to abnormal load or shock. Inspect and take appropriate
action.
IMPORTANT: NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THE JACK.
5.3.
5.4.
.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
57M.V3, 58M| Issue:1
06/04/20
Advertisement
