Husqvarna AUTOMOWER 430X Operator's Manual page 33

®
To pair Automower Connect and the product
1. Do steps 1–3 in To get access to the menu
on page 24 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower
Pairing > New pairing .
3. Follow the instructions in the app.
To set the Geofence level of sensitivity
The higher level of Geofence sensitivity, the
easier the alarm starts.
To get access to the menu
1. Do steps 1–3 in
on page 24 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower Connect >
Geofence .
3. Put the product in the center of the work
area.
New center point and push the OK
4. Select
button to set the source of the Geofence.
5. Use the arrow buttons to select level of
Geofence sensitivity.
To use the SMS function
The SMS function sends you an SMS when the
product is moved out of the GeoFence.
To get access to the menu
1. Do steps 1–3 in
on page 24 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower Connect >
Communication > Use SMS .
3. Push the OK button.
4. Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower Connect >
Communication > SMS phone numbers .
5. Push the number buttons to enter the
telephone number with country code. For
example (+)46701234567.
6. Push the BACK button.
Note: There is a maximum of 10 SMS each
month from the product.
1201 - 001 - 05.06.2019
Network
SIM PIN
This menu is only applicable if you use a non-
Husqvarna SIM.
APN settings
® The product must specify APN settings to be able
Connect >
to use and send data via the mobile net. Settings
for Husqvarna SIM is default.
To reset the Automower
1.
2.
3.
4.
3.10.9.4 Automower
Automower
communication.
Automower
the Automower
but has not created a Husqvarna account.
Automower
connection with the product is only temporary.
Husqvarna cannot guarantee the time period or
coverage of the long-range cellular connectivity.
There is therefore a possibility to communicate
with the product through Bluetooth
short-range of the product. You can use
Automower
as long as you have the product PIN code.
Note: The Automower
valid as long as you are within Bluetooth
If you move out of Bluetooth
loose the Automower
must do the connection process again.
To start to use Automower
1.
2.
3.
4.
®
Connect settings
To get access to the menu
Do steps 1–3 in
on page 24 .
Use the arrow buttons and the OK button to
move through the menu structure
Accessories > Automower Connect > Reset .
Proceed with reset of Automower Connect
settings when you select YES .
Push the OK button.
®
Direct
®
Direct uses short-range Bluetooth
® Direct is useful if the operator has
®
Connect app and the PIN code,
®
Direct is also useful if the
®
Direct without a Husqvarna account
®
Direct connection is only
®
range, you will
®
Direct connection and you
®
Direct
Download the Automower
your mobile device.
®
Select Automower Direct on the start
®
screen of the Automower
®
Start Bluetooth on your mobile device.
Set the Main switch on the product to
0 .
position
®
®
if you are in
®
range.
®
Connect app on
Connect app.
Installation - 33