Table of Contents
Advertisement
Samsung Semiconductor, Inc.
This document describes the ARTIK 530s Development Kit.
ARTIK 530
S
The ARTIK 530s development kit consists of the following components:
•
ARTIK 530s Interposer board (contains ARTIK 530s module)
•
ARTIK 530s Platform board (connected to the Interposer board at the factory)
•
ARTIK 530s I/O Expander board (connects to the Platform board for I/O expansion)
•
Bluetooth/WiFi antenna (for general purpose wireless communication)
•
Zigbee antenna (for low-power, low-speed close proximity wireless communication)
Each of these components is described in the following subsections.
ARTIK 530
S
The following documents provide additional information on the ARTIK 530s development environment.
•
ARTIK 530s Data Sheet
•
ARTIK 530s Hardware User Guide
•
ARTIK 530s/710s System Design Guide
•
ARTIK PCB Design Guide
•
ARTIK 530s Interposer board schematics
•
ARTIK 530s Platform board schematics
•
ARTIK 530s I/O Expander board schematics
•
ARTIK 530s Bill of Materials
A
DDITIONAL
Depending on the system environment, the following components may be required when interfacing to the ARTIK
530s Development Platform.
•
5V DC, 24W power supply for connecting to the DC power jack on the Platform board. Note that the 5V DC
jack is identical to a 12V DC jack. Ensure that the power supply is 5V, not 12V.
•
microUSB cable for connecting an external host or when transferring data over the USB OTG port.
•
USB-A cables for interfacing to one of two USB Host ports on the Platform board.
•
HDMI micro-to-standard cable for connection to an HDMI display.
•
Ethernet cable for direct connection to a local area network.
•
Connection to a local WiFi network via the Bluetooth/WiFi antenna on the Interposer board.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
D
K
EVELOPMENT
A
D
DDITIONAL
OCUMENTATION
M
ATERIALS
C
IT
ONTENTS
ARTIK 530s Development Kit
3
Advertisement
Table of Contents
