Master Mode - Philips EasyKey 5000 Series User Manual

Master mode

Master PIN code
To enter master mode, first light up the
touchscreen. Then, press [*] twice before
entering any other numbers. Next, enter
the master PIN code and confirm with [#] .
This will allow you to access master mode.
Attention
If the master PIN code is set to the default initial
PIN code, you will need to enter master mode,
select "1", and then select "5" to change the
master PIN code before proceeding with any other
operations.
Master fingerprint
使用管理员指纹进入
To enter master mode, first light up the
touchscreen. Then, press [*] twice before
entering any other numbers. Next, enter the
enrolled master fingerprint to access master
mode.
Attention
1.The door lock doesn't come with a master
fingerprint by default, so you'll need to add one
before using it.
2.Please do not set the master fingerprint and user
fingerprint to be the same.
Add a user
Add a user PIN code
Press [*] twice and enter the master PIN code,
then confirm with [#].
1 1
To access user settings, press [1], and then
select [1] to add a user. The door lock will
automatically recognize and add PIN codes
and fingerprints. Users only need to add the
corresponding access method directly.
Add a user PIN code: enter a new PIN code
of 6-12 digits and confirm with [#] , re-enter
the user PIN code and confirm with [#] . After
hearing a voice prompt indicating that the
user PIN code was added successfully. Press
[*] to return to the previous menu until you
exit the master mode.
Add a fingerprint: Place your finger on the
fingerprint sensor. After you hear a voice
prompt of "Please press again", take your
finger off and put it back again, repeat
the action until you hear a voice prompt
indicating that the fingerprint was added
successfully. Press [*] to return to the
previous menu until you exit the master
mode.
Attention
The PIN code length should be between 6-12
digits.
or
9