Smeg WMA 8168 LB1 User Manual page 42

Troubleshooting
Problem
Foam is overflowing
from the detergent
drawer.
Laundry remains
wet at the end of the
programme. (*)
(*) Machine does not switch to spinning step when the laundry is not evenly distributed
in the drum to prevent any damage to the machine and to its surrounding environment.
Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 6.2
A
42 / EN
reason
Too much detergent is used.
Excessive foam might have occurred and
automatic foam absorption system might
have been activated due to too much
detergent usage.
CAUTION:
If you cannot eliminate the problem although you follow the
instructions in this section, consult your dealer or the Authorized Service Agent.
Never try to repair a nonfunctional product yourself.
Solution
Š Mix 1 tablespoonful softener and ½
l water and pour into the main wash
compartment of the detergent drawer.
Š Put detergent into the machine
suitable for the programmes and
maximum loads indicated in the
"Programme and consumption table".
When you use additional chemicals
(stain removers, bleachs and etc),
reduce the amount of detergent.
Š Use recommended amount of
detergent.
Washing Machine /User's Manual