Table of Contents
Advertisement
7 Programme display
When you select the programme, the light
corresponding to the selected speed or the various
phases making up the programme come on.
Prewash/Wash
Start/
Rinses
Pause
Spinning
End
Door
The "Prewash/Wash" light is on during the prewash
and wash phase. If you have selected the "Rinse
Hold " function, this light will be on during washing.
Rinses: this light indicates that the machine is
rinsing.
Spinning: this light is on during the spin phase.
End: when the programme has finished, the "End"
pilot light comes on.
The "End" light flashes in the event of operating
problems :
4 flashes: door open
2 flashes: problem with water draining
1 flash: problem with water supply
For more information see paragraph "Something not
working"?
Door: the "Door" pilot light indicates if the door can
be opened:
- light on: the door cannot be opened
- light off: the door can be opened
It stays on during the whole programme indicating
that the door is locked.
When the light goes out, the door can be opened
(see page 14)
8 Programme selector dial
The selector is divided into 5 sections:
• Cotton
• Synthetic
• Hand wash / Delicate
• Wool
• Special programmes
O Reset programme/OFF
The selector dial can be turned either clockwise or
anticlockwise.
Position 60E corresponds to the ENERGY SAVING
programme and position
At the end of the programme the selector dial
must be turned to position "O" to switch the
machine off.
Attention!
If during a washing programme the selector dial is
turned to another programme, the pilot lights of the
programme progress display start to flash. The
machine will not perform the new selected
programme.
9
to "cold wash".
Advertisement
Table of Contents
