Indicator
Name
Safety
Support
Indicator
(Amber)
* Not available on all models
On/Blinking
Comes on when RDM, Low Speed
●
Braking Control
*
and/or CMBS
shuts itself off.
Models with Low Speed
Braking Control
Comes on when mud, snow, or ice
●
accumulates in the vicinity of sonar.
Models with blind spot
information system
●
Comes on when mud, snow, or ice
has accumulated in the vicinity of
the blind spot information system
sensor.
Indicator may come on temporarily
●
when the Maximum Load Limit is
exceeded.
Explanation
Stays on - The area around the camera is
●
TM
blocked by dirt, mud, etc. Stop your vehicle
in a safe place and wipe the debris off with
a soft cloth.
●
Have your vehicle checked by a dealer if the
indicator and message are still displayed
even after you have cleaned the area
around the camera.
2 Front Sensor Camera P. 506
Remove the obstacle in the vicinity of sonar
●
sensor.
2 Low Speed Braking Control
2 Sonar Sensors
*
●
Comes on while driving - Something may
be interfering with the blind spot
information system sensor. Check the
vicinity of the blind spot information system
sensor and remove any obstacles.
2 Blind spot information System
Make sure the total load is within the
●
Maximum Load Limit.
2 Maximum Load Limit P. 407
uuIndicatorsu
Message
*
P. 467
P. 509
*
P. 452
—
Continued
107