XINDAK XF-1000ES - AC LINE Conditioner Manual

PURPOSE AND CHARACTERS

Thank you for purchasing this AC LINE - Conditioner specially designed for Hi-Fi acoustics. It solved the problem of scattering sound and impure tones caused by the interface of miscellaneouswaves in the electrical network when playing. Meanwhile, it can be used for other electrical appliances in conformity with the conditions of this appliance, which filters the miscellaneous waves produced by appliance itself, but does not pollute the electrical network. To better use this appliance, please read the following content carefully.

NAME AND FUNCTION

1. Power Indication
2. Polarity Detect Button
3. Voltage Meter
4. Power Switch
5. Output Group 3
6. Output Group 2
7. Output Group 1
8. Power Input Socket
9. Polarity Switch
10. Grounded Connection

The phase detecting indicator: Indicate whether the phase of the power supply is corresponding. If the indicator is on when touch the DETECT button or the indicator has been on before touching it, it means the phase of the power supply is not corresponding, should change the phase switch to change its phase.

The phase detect: Put through the power. When the phase switch is in the position ,touch the 1 detect. If the indicator is on, it means the phase of the power supply input is not corresponding, should change the phase switch; if the indicator is off, it means the phase of the power supply input is corresponding.

Voltage Meter: Indicate the voltage of the power supply. The value is only for reference.

The switch for the power supply control: Through this switch can turn on or turn off the power of Group 2 and Group 3 two output power socket groups.

Output Group 1: Supply output current of 3A (Max.) to the electric equipment. This socket group CAN NOT be controlled by the power switch. On the power supply of the input socket is being putting through, this socket group will output the power.

Output Group 2: Supply 5A(Max.) current to the electro-equipment. This socket group is controlled by the power switch.

Output Group 3: Supply the output power of 5.5A (Max.) to the electric equipment. This socket group is controlled by the power switch.

The grounded connection: This unit uses single-phase 3-lines input. When using the power supply with single-phase 2-lines input which is not grounded, must ground this connection.

The power input socket: The power input interface of this machine, with the fuse box.

USING STEP

This unit requires single-phase 3-lines input. When using single-phase 2-lines power input, DO connect the grounded biding post on back of the unit to the ground and make sure the phase of the input power is correct.

Plug the attached 3-lines power cable into the power input socket on the rear panel, the power indicator will be light on. Touch the phase detect touching terminal to detect the phase of the power output socket. If the phase detect indicator is not light, the power output socket will be: A: Ground, B: Natural, C: Live. (See fig. 4) Otherwise, if the indicator is light it will be A: Ground, B: Live, C: Natural.

NOTICE

Because of the high voltage and heavy current inside, please not dismantle by yourself. If there is any fault, please cut off the power supply and send it to examine and repair. Please disconnect this unit with the power supply and the connected electric equipment, before changing the fuse.

PARAMETERS

Chengdu Xindak Electronic Co. LTD.
No. 13, Zone A, Dongsheng Industry Park, Huaishudian Road,
Chengdu, Sichuan, China.

Tel/Fax: 86 28 84711593
www.xindak.com