Satellite Receiver And Vcr - Sony FD Trinitron WEGA KD-34XBR970 Operating Instructions Manual

Satellite Receiver
and VCR
Using
S VIDEO jacks?
See page 7.
TV
DIGITAL DIGITAL
AUDIO AUDIO
OUT OUT
12
To connect a satellite receiver and VCR
1
Connect the CATV cable or Antenna to the single (input) jack of
the splitter.
2
Use a coaxial cable to connect one of the splitter's two output
jacks to the TV's VHF/UHF jack.
3
Use a coaxial cable to connect the splitter's other output jack to
the satellite receiver's VHF/UHF input jack.
4
Connect the satellite antenna cable to the satellite receiver's
satellite input jack.
5
Use a coaxial cable to connect the satellite receiver's VHF/UHF
output jack to the VCR's VHF/UHF input jack.
6
Use an A/V cable to connect the satellite receiver's A/V output
jacks to the TV's A/V input jacks.
7
Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
8
Run Auto Program, as described in "Setting Up the Channel List"
on page 20.
Splitter
(not supplied)
Coaxial
cable
PCM/ PCM/
DOLBY DIGIT DOLBY DIGIT AL AL
A/V cable
7
A/V cable
CATV
cable/antenna
Satellite antenna cable
Coaxial
cable
Satellite receiver
Coaxial
cable
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
VCR