Using Highlight And Select; Complete The Assisted Setup; Order Programming - RCA DRD435RH User Manual

VCR ON OFF
DVD
AUX1 AUX2 DIRECTV
MUTE SKIP
+
CH
CH -
FETCH GO BACK
GUIDE INFO
Arrow
SELECT
buttons
MENU
CLEAR
MENU
button

Complete the Assisted Setup

If you installed your satellite dish antenna yourself, you may have already used the Assisted Setup to find dish-pointing coordinates, acquire and fine-
tune the signal, and run a system test.
If you need to run the setup again, select System Setup from the Main menu, then select Assisted Setup.
To check your dish-pointing coordinates or run the signal strength meter, display the Main menu, then select System Setup, and finally Dish Pointing.
Tip
When you order programming, you need to know your
access card and receiver ID numbers. To get these
numbers, select System Setup from the Main menu,
then System Test.
Wait for the system to run all of its tests. The access
card and receiver ID numbers are displayed at the end
of the system test.
Write the access card and receiver ID numbers in the
space below for easy reference:
Important!
If local channels are available in your area and you
decide to subscribe, the receiver will need to download
all of your program guide information again. This
might take a few minutes. See "Wait for the Receiver
to Download ADVANCED PROGRAM GUIDE™
Information" on page 8 for more information.
Chapter 1

Using Highlight and Select

TV
All on-screen menus can be handled the same way, using highlight and select navigation.
Highlight and select navigation has two steps:
1. Use the arrow buttons (up, down, left, and right) on the remote control to highlight different
choices on the screen.
DIRECTV
button 2. Press SELECT to select the highlighted item.
Note: When a highlighted on-screen menu choice has a number beside it, you can also press the corresponding
number button on the remote control to select it.
Once you know how to navigate on-screen menus, you can complete the Assisted Setup (see the
next step) and explore the menu system.
(-)
To display the on-screen menu system, press the remote control's DIRECTV button, then press the
SELECT
MENU button.
button
Note: Don't worry about getting stuck inside a menu. Pressing the CLEAR button on the remote control takes you
out of the menu system and back to the program you were watching.
CLEAR
button

Order Programming

After you have installed your DIRECTV® System, you should contact DIRECTV to order DIRECTV®
programming.
With this receiver and the proper satellite dish antenna, you may be able to subscribe to local
channels from DIRECTV in certain areas. Additional equipment may be required in some markets.
Check with your retailer or visit DIRECTV.com for information on availability of local channels from
DIRECTV in your area.
ACTIVATION OF PROGRAMMING MAY BE SUBJECT TO CREDIT APPROVAL AND REQUIRES VALID
SERVICE ADDRESS, SOCIAL SECURITY NUMBER AND/OR MAJOR CREDIT CARD. DEPOSIT OR
PREPAYMENT MAY BE REQUIRED. Professional and collegiate sports subscriptions sold separately.
Eligibility for local channels based on service address within certain designated market areas as
defined by Nielsen Media Research, Inc. In some areas served by members or affiliates of the
National Rural Telecommunications Cooperative, local channels may be available from DIRECTV
rather than the NRTC member or affiliate. Programming, pricing, terms and conditions subject to
change. Hardware and programming sold separately. Pricing is residential. Taxes not included.
Equipment specifications and programming options may vary in Alaska and Hawaii. DIRECTV
services not provided outside the U.S. DIRECTV programming is sold separately and independently
of DIRECTV System hardware. A valid programming subscription is required to operate DIRECTV
System hardware. Receipt of DIRECTV programming is subject to the terms of the DIRECTV
Customer Agreement; a copy is provided at DIRECTV.com and in your first bill. Activate your
DIRECTV ® programming today at 1-800-DIRECTV (1-800-347-3288).
Connections & Setup
9