Table of Contents
Advertisement
Quick Links
User Manual
S*H85*
The color and the appearance may differ depending on the product, and the specifications are subject to change without
prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.
(For India Only)
This product is RoHS compliant.
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline
numbers-1800 40 SAMSUNG(1800 40 7267864) (Toll-Free)
Advertisement
Table of Contents
Related Manuals for Samsung S24H851QF Series
Summary of Contents for Samsung S24H851QF Series
- Page 1 Samsung Electronics owns the copyright for this manual. numbers-1800 40 SAMSUNG(1800 40 7267864) (Toll-Free) Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than that of Samsung Electronics are owned by their respective owners.
-
Page 2: Table Of Contents
Table of contents Before Using the Product Removing the Stand (S27H850QF* / S27H851QF*) 22 Screen Setup Securing the Installation Space SAMSUNG MAGIC Bright Precautions for storage Brightness Connecting and Using a Source Device Safety Precautions Contrast Cleaning Read below before installing the monitor. - Page 3 System Requirements A Product damage caused by customer's fault Display) settings Others Transparency Troubleshooting Guide Language Requirements Before Contacting Samsung Customer Display Time Service Center Testing the Product Checking the Resolution and Frequency Check the following. Setup and Reset Q & A DisplayPort Ver.
-
Page 4: Before Using The Product
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ― Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.) -
Page 5: Cleaning
• Do not disconnect the power cord while the product is being used. • Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • Keep the power socket where the power cord is connected unobstructed. -
Page 6: Installation
Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a ‒ The product lifespan may be reduced or a fire may result. -
Page 7: Operation
There is a high voltage inside the product. Never disassemble, repair or modify the product ‒ Be sure to power off the product and disconnect the power cord when water or other foreign yourself. substances have entered the product. Then contact Samsung Customer Service Center. ‒ Contact Samsung Customer Service Center for repairs. •... - Page 8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. •...
-
Page 9: Preparations
Chapter 02 Preparations Parts Icons Description Multi directional button that helps navigate. JOG Button ― The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as ―... -
Page 10: Direct Key Guide
Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. ― The function buttons page shows if Eye Saver Mode is enabled. -
Page 11: Function Key Guide
Function Key Guide ― To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again. UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes. PRESS(ENTER): The selected item will be applied. - Page 12 When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode Source Change Down PRESS(ENTER) for 2 seconds Power Off When the monitor displays the Main menu the JOG Button could be used as below. JOG Button Action UP/DOWN...
-
Page 13: Changing Brightness, Contrast And Eye Saver Mode Settings
Brightness focus down. To deactivate the Mute function, access the Volume control screen, then increase or decrease ― This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode. MAGIC the Volume. ― This menu is not available when Eco Saving Plus is enabled. -
Page 14: Reverse Side
Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connect the power cord for your monitor to the POWER IN port on the back of the product. DP OUT Connects to another product using a DP cable. -
Page 15: Adjusting The Product Tilt And Height
Adjusting the Product Tilt and Height Rotating the Monitor Screen ― The color and shape of parts may differ from what is shown. Specifications are subject to change without ― You can rotate your monitor as shown below. notice to improve quality. ―... -
Page 16: Anti-Theft Lock
Anti-theft Lock Precautions for moving the monitor ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: •... -
Page 17: Installing A Wall-Mount Kit Or Desktop Stand (S24H850Qf* / S24H851Qf*)
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on your own. -
Page 18: Installing A Wall-Mount Kit Or Desktop Stand (S27H850Qf* / S27H851Qf*)
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on your own. -
Page 19: Installation
Installation Attaching the Stand (S24H850QF* / S24H851QF*) ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Insert the stand neck into the stand base in the Place the protective Styrofoam (cushion) included Place the stand neck on the display, as shown in Turn the stand neck of the display clockwise for 90°... -
Page 20: Attaching The Stand (S27H850Qf* / S27H851Qf*)
Attaching the Stand (S27H850QF* / S27H851QF*) ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Insert the stand neck into the stand base in the Place the protective Styrofoam (cushion) included Place the stand neck on the display, as shown in the Turn the stand neck of the display clockwise for 90°... -
Page 21: Removing The Stand (S24H850Qf* / S24H851Qf*)
Removing the Stand (S24H850QF* / S24H851QF*) ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. ― The exterior may differ depending on the product. Place the product on a clean and flat floor as shown in Lift the stand neck in the arrow direction to detach it Unfasten the connecting screw at the bottom of the the figure. -
Page 22: Removing The Stand (S27H850Qf* / S27H851Qf*)
Removing the Stand (S27H850QF* / S27H851QF*) ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. ― The exterior may differ depending on the product. Place the product on a clean and flat floor as shown in Lift the stand neck in the arrow direction to detach it Unfasten the connecting screw at the bottom of the the figure. -
Page 23: Connecting And Using A Source Device
HDMI source supports 2560 x 1440 @ 60 Hz. ― When connecting an HDMI cable, use the cable that came with the components of the monitor. If you use an HDMI cable other than provided by Samsung, the image quality may be degraded. -
Page 24: Connection Using The Hdmi-Dvi Cable
USB Type-C port. ― Make sure that the USB Type-C cable complies with the USB PD specification. Otherwise, your devices may be damaged. A Samsung branded cable is recommended. -
Page 25: Connection Using The Dp Cable
Connecting an External Monitor Connection Using the DP Cable Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. Connection Using an DP Cable DP OUT ―... -
Page 26: Connecting The Product To A Pc As A Usb Hub
Connecting the Product to a PC as a USB HUB Utilizing the Product as a USB HUB Using the product as a hub, connect and use various source devices with the product at the same time. A PC cannot connect to multiple source devices at the same time as it has a limited number of input/ Connecting a PC to the Product output ports available. - Page 27 ― For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source. ― The battery can be charged in the power-saving mode, but it cannot be charged when the product is powered off. ―...
-
Page 28: Tidying Up The Connected Cables (S24H850Qf* / S24H851Qf*)
Tidying Up the Connected Cables (S24H850QF* / S24H851QF*) Stand assembly is complete. Rotate the machine to the highest vertical Connect the cables to their correct ports, and then Rotate the machine to the horizontal position. position. arrange each of the two cables through either side of the COVER-STAND CABLE, as shown in the figure. -
Page 29: Tidying Up The Connected Cables ( S27H850Qf* / S27H851Qf* )
Tidying Up the Connected Cables ( S27H850QF* / S27H851QF* ) Tilt the display, as shown in the figure. Rotate the machine to the highest vertical Connect the corresponding cables. Arrange the cables through the groove on the position. COVER-REAR, and then attach the COVER-REAR SUB. -
Page 30: Connecting The Power
Connecting the Power POWER IN To use the product, connect the power cable to a power outlet and the POWER IN port on the product. ― The input voltage is switched automatically. -
Page 31: Correct Posture To Use The Product
Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. -
Page 32: Screen Setup
Custom: Customize the contrast and brightness as required. • Standard: Obtain a picture quality suitable for editing documents or using Internet. SAMSUNG MAGIC Bright • Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content. -
Page 33: Brightness
You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. ― This menu is not available when A higher value will make the picture appear brighter. SAMSUNG Bright is set to Cinema Dynamic Contrast mode. -
Page 34: Samsung Magic Upscale
SAMSUNG MAGIC Upscale Eye Saver Mode Upscale function can enhance the layers of the picture details and the vividness of the picture. Set to an optimum picture quality suitable for eye relaxation. SAMSUNG MAGIC The function has more obvious effects on low-resolution pictures. -
Page 35: Picture Size
Picture Size Screen Adjustment ― This menu is only available when Change the picture size. Picture Size is set to Screen Fit Mode. When a 480P or 576P or 720P or 1080P signal is input in mode and the monitor can display normally, ―... -
Page 36: Configuring The Pip/Pbp Settings
Chapter 05 Configuring the PIP/PBP Settings A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ ― PIP/PBP mode is compatible with Windows 7, Windows 8, and Windows 10. -
Page 37: Size
Size Sound Source Select the size and aspect ratio of the sub-screen. Set which screen you want to hear the sound for. • : Select the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the screen is 1280 x 1440 (width x height). -
Page 38: Source
Source Picture Size Select the source for each screen. PIP Mode (available in PIP mode (Size PIP Mode (available in PIP mode(Size Select the image size for sub-screen. ― The input source for the main screen changes. mode ― With the exception of the current input source, the other two input sources can be selected. ―... -
Page 39: Contrast
Contrast PBP Mode (available in PBP mode(Size Set the Picture Size for each of the divided screens. mode PIP Mode (available in PIP mode(Size • Auto: Display the picture according to the aspect ratio of the each screen input source. Adjust the contrast level for sub-screen. -
Page 40: Adjusting Osd (On Screen Display) Settings
Chapter 06 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ Language from what is shown. -
Page 41: Setup And Reset
Chapter 07 Setup and Reset A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ DisplayPort Ver. from what is shown. -
Page 42: Dp Out
DP OUT DP OUT (MST/SST) Function Implementation Select the input signal to output to the next monitor and the output mode to simplify the connection Connecting a PC via DisplayPort and control of displaying devices. ― If the mode is selected for OUT, FreeSync is not supported for all connected monitors. - Page 43 Try to use a Monitor 1 Monitor 2 Samsung branded cable, and visit the website of the graphics card manufacturer to check and update its driver with the latest version. •...
- Page 44 Try to use a Samsung branded cable, and visit the website of the graphics card manufacturer to check and update its driver with the latest version.
-
Page 45: Freesync
The response rate during the game may fluctuate depending on the resolution. A higher resolution generally decreases the response rate. • The sound quality of the monitor may be degraded. ― If you encounter any issues when using the function, contact the Samsung Service Center. -
Page 47: Smart Eco Saving
Smart ECO Saving PC/AV Mode Smart ECO Saving function reduces power consumption by controlling the electric current used by PC/AV Mode to AV. The picture size will be enlarged. the monitor panel. This option is useful when you view a movie. ―... -
Page 48: Source Detection
Source Detection Information Select either Auto Manual as the method to recognize input signal. View the current input source, frequency and resolution. ― This menu is not available when the mode is selected for OUT. Key Repeat Time Control the response rate of a button when the button is pressed. Acceleration, sec, or 2 sec... -
Page 49: Installing The Software
Windows 7 32Bit/64Bit Easy Setting Box enables users to use the monitor by partitioning multiple sections. • Windows 8 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at • Windows 8.1 32Bit/64Bit http://www.samsung.com. -
Page 50: Troubleshooting Guide
Check the following. Customer Service Center Installation issue (PC mode) ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. - Page 51 Not Optimum Mode is displayed. Video playback is choppy. This message appears when the signal from the graphics card exceeds the maximum resolution or Playback of high-definition large video files can be choppy. This may be because the video player is frequency for the product.
-
Page 52: Q & A
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor, and adjust Refresh rate under Monitor settings. •... -
Page 53: Specifications
Refer to the label at the back of the product as the standard voltage can ― This device is a Class B digital apparatus. vary in different countries. ― For detailed device specifications, visit the Samsung Electronics website. Signal connectors HDMI, DP, USB Type-C Environmental conditions Operating Temperature: 10 °C –... -
Page 54: Standard Signal Mode Table
Standard Signal Mode Table Model Name S24H850QF* / S24H851QF* / S27H850QF* / S27H851QF* Synchronization Horizontal Frequency 30 – 89 kHz Vertical Frequency 50 – 75 Hz Resolution Optimum Resolution 2560 x 1440 @ 60 Hz Maximum Resolution 2560 x 1440 @ 60 Hz If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. - Page 55 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1280 x 1024 79.976 75.025 135.000 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900RB 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250 VESA, 1920 x 1080 67.500...
-
Page 56: Appendix
• Use of supplies or separately sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •...