Advertisement
SET UP – BEFORE USE (CONTINUED)
will not be in use for 15 hours, it is possible to extend the LED
Spotlight battery power by charging for a few hours only (2 hours
of charging provides approximately 20~30 minutes runtime for
the LED Spotlight).
(Plug into 12V DC
DC Jack
(with Plastic
Protector Cap)
AC/DC Power Adapter
(Plug in DC Jack)
Red LED
Indicator Light
1.
Insert the 12V DC Car Power Adapter into the DC Jack of the LED
Spotlight.
2.
Plug the other end of the 12V DC Car Power Adapter into the 12V
DC power socket inside your car.
IMPORTANT: The Rechargeable LED Spotlight will not switch on
when the red indicator light is switched on or when the battery is
being charged.
3.
Allow the battery to charge while car is in use.
4.
Unplug the 12V DC Car Power Adapter from the car power socket
and the LED Spotlight when car is switched off.
5.
Replace the Plastic Protector Cap when charging is complete and
the 12V DC Car Power Adapter is unplugged
6.
The Rechargeable LED Spotlight is now ready for use.
IMPORTANT: Charging the LED Spotlight using the 12V DC Car
Power Adapter inside the car can drain the car battery if the car
engine is not running. Unplug the 12V DC Car Power Adapter from
the power socket inside the car, when the car engine is switched
OFF and the car is not in use.
IMPORTANT: Some models of cars will cut power to the 12V DC
car power socket when the car is switched off. When there is not
power to the 12V DC car power socket, then the Rechargeable
LED Spotlight will not charge.
WARNING: When charging the LED Spotlight from your car, or
when using your car in general, beware of the exhaust fumes
from your car. Do not switch on the car engine in a garage or
enclosed area and make sure there is good ventilation inside the
car while car is switched on. Avoid idling the car engine for
prolonged periods with people inside the car.
OPERATION
1: LED Spotlight
12V DC Car
Power Adapter
LED Spotlight
power socket)
1.1
Position the LED Spotlight to shine in a position convenient for
your use. Follow the instructions in Operation #2 of this
instruction manual for mounting and handling options.
1.2
Locate the ON/OFF Switch on the side of the LED Spotlight. Press
the button to the "I" position to turn ON the LED Spotlight. Return
the switch to the "O" position to turn OFF the LED Spotlight
1.3
The LED Spotlight can shine for up to 3 hours (when the battery is
fully charged)
WARNING: THE LED SPOTLIGHT IS EXTREMELY BRIGHT AND
CAN CAUSE SERIOUS DAMAGE TO EYESIGHT. NEVER LOOK
DIRECTLY AT THE LED SPOTLIGHT AND NEVER POINT THE LED
SPOTLIGHT INTO THE FACE OR EYES OF OTHER PEOPLE OR
ANIMALS.
2: Mounting & Positioning The Rechargeable LED Spotlight
Hanging Hole
Two-Position Adjustable Handle
2.1
Press Handle Button to
adjust handle position
Depress the Handle Button to adjust the position of the handle in
a horizontal or vertical position. Release the Handle Button to lock
the handle in place.
2.2
Four-Angle Adjustable Stand
Four-Angle
Adjustable Stand
Adjusting the stand conveniently positions the LED Spotlight to
shine at different angles over your work area – Hands-free. Pull
the adjustable Stand from back to front to adjust the angle of the
Spotlight when needed.
OPERATION (CONTINUED)
2.3
Hanging Holes
There are 2 built-in Hanging Holes that offer the options of
hanging the LED Spotlight in a horizontal or vertical position.
Convenient for when you need to use the LED Spotlight
hands-free, or when mounting the light at a height above your
ON/OFF Switch
work area. Simply use string or hooks that can be inserted
("I" / "O" )
through the built-in Hanging Holes, to hang the LED Spotlight in
place.
Handle Button
Hanging Hole
Advertisement
