Stopping The Engine - Husqvarna EZ4824TF BF Operator's Manual

Stopping the Engine

1. Move the throttle to the minimum position (tortoise
symbol).
2. Move the steering controls outward.
3. Disengage the mower deck by pressing the blade
switch down.
4. Raise the mower deck by pressing the button on
the lever and pulling backward to the transport
position.
5. When the machine is standing still, activate the
parking brake by pushing the lever button and
pulling the lever upward.
If the engine has been worked hard, allow it to idle
at least 60 seconds to attain a normal operating
temperature before stopping. To prevent fouling
the spark plugs, avoid idling the engine for longer
periods.
6. Turn the ignition key to the stop position.
7. Remove key. Always remove key when leaving the
mower to prevent unauthorized use.
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than OFF will cause the battery to be
discharged.
OPERATION
Disengage the mower deck and move throttle to minimum
Mower deck lifting lever
8058-134
8058-019
33