Table of Contents
Advertisement
Lights
4. Turn on the parking lights and
check that the new bulb is
working.
5. Reinstall the socket. Turn it clock-
wise until it locks.
6. Put the license light assembly in
place. Reinstall the two screws and
tighten them securely.
Maintenance
Replacing an Interior Light Bulb
(U.S.: EX, Si, Canada: Si, SiR)
INTERIOR LIGHT
1. Remove the lens by carefully
prying on the edge of the lens in
the middle with a fingernail file or
a small flat-tip screwdriver. Do not
pry on the edge of the housing
around the lens.
(U.S.: DX, HX, Canada: DX)
INTERIOR LIGHT
2. Remove the bulb by pulling it
straight out of its metal tabs.
3. Push the new bulb into the metal
tabs. Snap the lens back in place.
Advertisement
Table of Contents
