Panasonic QE-QL101, QE-QL201 - Mobile Backup Power Manual

Safety precautions

Be sure to follow the instructions

The symbols below are used to explain the precautions to prevent risk of people and damage of property.

• The symbols below indicate the levels of risk and damage resulting from wrong operation.

	This symbol indicates the high risk of death or serious injury.
	This symbol indicates the risk of death or serious injury.
	This symbol indicates the risk of minor injury or property damage.

• The symbols below indicate the contents of instructions you are requested to observe.
  (The symbols below are examples.)

	You must not do the action described with this symbol.
	You must do the action described with this symbol.

Precautions for use

• Do not overcharge the fully charged Mobile Backup Power. Charge after using it. Even if the Mobile Backup Power has been fully charged, the optical indicator lights several seconds when it is recharged.
• If noise interferes with the radio or TV, distance the Mobile Backup Power 1 m or more.
• It is normal that the Mobile Backup Power gets warm during use or charge.
• It is normal that a small buzzing sound is heard during use or charge.
• It is normal that the charge indicator of some devices to be used and that of the Mobile Backup Power do not go off at the same time. Charging is completed when the charge indicator of the device to be used goes off.
• The device to be used may not be fully charged depending on the battery capacities of the device and the Mobile Backup Power. The charge indicators of the Mobile Backup Power and the device to be used go off also when the Mobile Backup Power runs out of battery.
• It is possible to use a mobile phone or other device while it is charged by the Mobile Backup Power. In that case, the remaining battery may become low because the battery of the mobile phone or other device is not charged.
• The Mobile Backup Power cannot be charged during supplying power.
• When the product is used for the first time or was not used for a long time, be sure to charge it before use.
• Avoid storing the product with its battery fully charged or empty.
  Otherwise performance and lifetime of the battery may be degraded.
• Use the genuine AC adapter to charge from a household outlet. Using other adapter may damage the product resulting in smoke or fire.

Accessories

Features

• Power Supply for electronic devices
• 2-way charge, AC & USB
• Battery Indicator with 3 colors

Part names

<QE-QL201>

Optical indicator

• Lights during charging and outputting (see "Optical indicator").

DC output button (indicates battery level)

• Turns on/off DC output.
• If pressed with no device connected, the remaining battery level is displayed for approximately 10 minutes (see "Optical indicator").

<QE-QL101>

DC output button (indicates battery level)

• Turns on/off DC output.
• If pressed with no device connected, the remaining battery level is displayed for approximately 10 minutes (see "Optical indicator").

Optical indicator

• Lights during charging and outputting (see "Optical indicator").

How to use

The illustrations show QE-QL201 as an example.

How to charge the Device

To charge from a computer

1. Connect the USB type micro-B plug of the included USB cable to the USB type micro-B input terminal of the Mobile Backup Power.
2. Connect the USB type A plug of the included USB cable to the USB termainal of an active computer to start charging.

• The optical indicator is on during charging (see "Optical indicator").

(Note)

• Do not connect other devices to the other USB type A output terminals of the computer during charging.

3. The optical indicator goes off when charging is completed.

• Estimated charging time:
  <QE-QL201> Approx. 14 hours
  <QE-QL101> Approx. 7 hours

4. Disconnect the included USB cable after charging is completed.

To charge from a household outlet

1. Connect the USB type micro-B plug of the included AC adapter to the USB type micro-B input terminal of the Mobile Backup Power.
2. Connect the power plug of the included AC adapter to the outlet to start charging.

• The optical indicator is on during charging (see "Optical indicator").

3. The optical indicator goes off when charging is completed.

• Estimated charging time:
  <QE-QL201> Approx. 7 hours
  <QE-QL101> Approx. 3.5 hour

4. After charging is completed, remove the included AC adapter in the reverse procedure.

How to supply power to a device

1. Connect the USB type micro-B plug to the terminal of the device to be used.

• The included USB cable can be used for a device with a USB type micro-B charging terminal. If the dedicated cable is included with the device to be used, use it for charging.

2. Connect the USB type A plug to the USB type A output terminal of the Mobile Backup Power.
3. Press the DC output button.

• Output is done normally when the optical indicator is on (see "Optical indicator").

4. When supplying power ends, press the DC output button to turn off.

• The optical indicator goes off.

(Note)
Before use, check compatibility of the device in its instruction manual.

• It may not work suitably depending on the types.
• The total output current of the product is 1.5 A. Simultaneous use of two devices may not be possible depending on their specifications (when using QE-QL201).
• Some of the devices which communicate with a computer during being powered via the USB cable may not be used.
• The Mobile Backup Power cannot be charged during supplying power.

Optical indicator

<Charging>
*In some cases, charging may not be completed. "Troubleshooting"

<Outputting>
*The product may be broken. See "Troubleshooting".

<Indicating battery level>

Troubleshooting

Check the items of the table below.

(*1) See the instruction manual of the computer to exit standby more.
(*2) The battery life depends on the use conditions. Note that the internal battery cannot be replaced.

Specifications

* Excluding Accesories

<AC adapter>

<Charging/outputting time (guide value)>

• The charging time above is a guide value for charging the fully discharged Mobile Backup Power to the full level.
  It changes depending on the indicated battery level of the Mobile Backup Power and the ambient temperature.
• The "USB input" charging time above is the time of when the included USB cable is used.
• The outputting time above is a guide value of when the fully charged Mobile Backup Power is output at DC 5.0 V, 500 mA.

Panasonic Corporation

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Panasonic QE-QL101, QE-QL201 - Mobile Backup Power Manual