Table of Contents
Advertisement
You may also change the speed and temperature settings; see, "Spin speed selection" and
"Temperature selection".
C
If no change is allowed, the relevant light will flash for 3 times.
Adding or taking out laundry
1. Press Start / Pause button to switch the machine to pause mode. The programme
follow-up light of the relevant step during which the machine was switched into the
pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press Start / Pause button to start the machine.
4.6.14 Cancelling the programme
To cancel the programme, turn the Programme Selection knob to select another
programme. Previous programme will be cancelled. End / Cancel light will flash
continuously to notify that the programme has been cancelled.
Pump function is activated for 1-2 minutes regardless of the programme step, and
whether there is water in the machine or not. After this period, your machine will be ready
to start with the first step of the new programme.
C
Depending on the step where the programme was cancelled in, you may have to put
detergent and softener again for the programme you have selected anew.
4.6.15 End of programme
"End" appears on the display at the end of the programme.
1. Wait until the loading door light illuminates steadily.
2. Press On / Off button to switch off the machine.
3. Take out your laundry and close the loading door. Your machine is ready for the next
washing cycle.
4.6.16 Your machine is equipped with a "Standby Mode"
In case of not starting any programme or waiting without making any other operation
when the machine is turned on by On/Off button and while it is in selection step or if no
other operation is performed approximately 2 minutes after the programme you selected
has come to an end, your machine will automatically switch to energy saving mode.
Brightness of indicator lights will decrease. Also, if your product is equipped with a display
showing the programme duration, this display will completely turn off. In case of rotating
the Programme Selection knob or pressing any button, lights and display will restore to
their previous condition. Your selections made while exiting the energy saving mode may
change. Check the appropriateness of your selections before starting the programme.
Readjust if necessary. This is not a fault.
Washing Machine / User's Manual
31 / EN
Advertisement
Table of Contents
